Soudal Genius Gun Gap Filler Expanding Foam - 600ml 
FloPlast Square 112° Offset Downpipe - White 
ALM Code 3 Milled Lead - 1200mm x 6m 
Timco Precision Screwdriver Set 6pcs 
ALM Code 7 Milled Lead - 150mm x 3m 
Timloc 1206 Underfloor Vent Horizontal Rear Extension + 100mm 
Easy-Trim Over Fascia Vent - 25mm x 1m 
Thompson's Water Seal - 5L 
OX Tough Builders Socks (UK 6-11) 
Bond It Mega Stik PU Adhesive - Beige 750ml 
Everbuild Weather Mate Gap Filler & Adhesive - Black 295ml (Box of 25) 
Code 4 Cast Lead - 300mm x 6m 
Timco Screwdriver 6-Tool Set 
Bond It Bath Mate Bath & Kitchen Sealant - White EU3 
Soudal Soudafoam Window & Door Gun Grade – 750ml (Box of 12) 
Timco Self-Drilling Wing-Tip Metal Construction Screw 
Bond It Aluminium Solar Reflective Paint - Silver 5L 
Everbuild Everflex Mirror Mate Adhesive - White 290ml (Box of 12) 
OX Pro Tough Bucket, Blue - 15 Litre 
Everbuild Power Pro Sealant Gun - C4 (290ml - 400ml) 
OX Polyzip Flex C2 Cutter - 25mm to 55mm 
Samac Half Round Snowguard Bracket - 225mm (9") 
FloPlast Square Line Internal Stop End Black – 114mm 
Ronseal Multi Purpose Smooth Finish Filler - 2.2Kg 
Code 5 Cast Lead – 650mm x 6m 
Soudal Acetoxy Stay Fresh Sanitary Silicone Sealant – Ice White 290ml 
Bond It Stabilizing Solution - White 5L 
ALM Code 8 Milled Lead - 510mm x 6m Roof Felt Adhesives
Best Sellers
-
OX Pro Tough Nylon Braided Builders Line 105m / 350ft – Cyan
£11.99 Incl VAT £9.99 Excl VAT Add to basket -
Code 3 Cast Lead – 760mm x 3m
£97.10 Incl VAT £80.92 Excl VAT Add to basket -
Bond It Decking Cleaner – Clear 5L
£8.99 Incl VAT £7.49 Excl VAT Add to basket -
ALUKAP-SS Top Wall Flashing, White or Brown
From: £79.40 Incl VAT £66.17 Excl VAT Select options This product has multiple variants. The options may be chosen on the product page -
Everbuild Everflex 195 Siliconised Acrylic Sealant – White 300ml
£5.99 Incl VAT £4.99 Excl VAT Add to basket -
Everbuild Firefoam B1 Gun Grade Expanding Foam – Pink 750ml
£15.49 Incl VAT £12.91 Excl VAT Add to basket
Roof Felt Adhesives
Browse through our range of roof felt adhesives. At ERoofing, we stock a substantial range of high-quality felt adhesive that come in ranging sizes from 1 litre to 25 litre.
Applying Felt Adhesive
You must apply felt adhesive either using a stiff brush, mop or squeegee. To avoid thickening in cold weather, stock the felt adhesive in a warm room before — for more straightforward application.
Cromar Roofing Felt Adhesive, in particular, should be applied to the surface and left for 15 to 30 minutes (depending upon drying conditions) to develop its full thickness.
The felt should then be placed into the wet adhesive film carefully, rubbing or rolling each section down to ensure highest contact with the adhesive and to expel air trapped between the surface and the felt. Wherever possible, the felt should be unrolled into the roofing felt adhesive and rolled with a light roller (15 to 25kg).
The overlaps should be at least 75mm on the side and 150mm at the ends. To ensure a complete bond at the side and end laps, Cromar Roofing Felt Adhesive can be applied to the underside of the felt and well compacted.
When using with a timber structure, the first layer of felt must be nailed down. Successive layers of felt may then be bonded using Cromar Roofing Felt Adhesive.
When used on concrete surfaces that are porous, it will be necessary to prime the surface first, ensuring that the primer is completely dry before the first layer of felt is applied.
Twenty-four hours after laying felt, check all bondings to ensure that full adhesive has been obtained. Mainly check all laps.
