Bond It Heavy Duty Gun Foam Applicator 
Bond It Dustproof & Hardener - Clear 5L 
ALM Code 3 Milled Lead - 914mm x 3m 
Soudal Fix ALL High Tack – White 290ml (Box of 12) 
Timloc Non-Profile Tile Vent Brown (Box of 8) 
FloPlast Square Line Pipe Branch White – 65mm 
ALM Code 6 Milled Lead Flashing - 510mm x 3m 
Soudal Sealant Remover – 400ml 
Ronseal's EGC Hardener BPO - 30g 
Everbuild Stixall Extreme Power - Brown 290ml (Box of 12) 
Timloc Dry Fix Roll Out Ridge System Pack - Black 6m 
OX Polyzip Flex C2 Cutter - 25mm to 55mm 
Standard Safety Gloves (Various Colours) 
Ronseal Trade 10Yr Woodstain Satin Walnut 750ml Brown 
Code 8 Cast Lead - 300mm x 6m 
Timco Professional Wire Strippers 
Everbuild Black Jack 904 Roof Felt Adhesive – 2.5 Litre 
Bostik Flashband Self Adhesive Flashing Tape – Grey 3.75m x 75mm 
Easy-Trim Lead R Flashing Smooth – 600mm x 5m 
Soudal Trade Gun Grade Expanding Foam - 750ml (Box of 12) 
Klober 20K Slate Vent KG9795-0429 Slate Grey 
SEAL PRO, Low Modulus Hybrid Universal Sanitary Sealant & Adhesive Bond, White - EU3 
FloPlast Square Line Pipe Connector White 
Timloc Double Pantile Tile Vent Grey (Box of 6) Roof Felt Adhesives
Best Sellers
-
FreeFlow Gutter Drain 90° Offset Bend – Black
£3.24 Incl VAT £2.70 Excl VAT Read more -
Easy-Trim Starter / Close Unit
From: £5.99 Incl VAT £4.99 Excl VAT Select options This product has multiple variants. The options may be chosen on the product page -
Cromar Vent 3 Air High Performance Breathable Membrane 1m x 50m
£113.98 Incl VAT £94.98 Excl VAT Add to basket -
ALM Code 4 Milled Lead – 180mm x 3m
£31.15 Incl VAT £25.96 Excl VAT Add to basket -
Code 3 Cast Lead – 390mm x 6m
£99.96 Incl VAT £83.30 Excl VAT Add to basket -
FloPlast Downpipe Rainwater Diverter Kit RVS1
£14.99 Incl VAT £12.49 Excl VAT Add to basket
Roof Felt Adhesives
Browse through our range of roof felt adhesives. At ERoofing, we stock a substantial range of high-quality felt adhesive that come in ranging sizes from 1 litre to 25 litre.
Applying Felt Adhesive
You must apply felt adhesive either using a stiff brush, mop or squeegee. To avoid thickening in cold weather, stock the felt adhesive in a warm room before — for more straightforward application.
Cromar Roofing Felt Adhesive, in particular, should be applied to the surface and left for 15 to 30 minutes (depending upon drying conditions) to develop its full thickness.
The felt should then be placed into the wet adhesive film carefully, rubbing or rolling each section down to ensure highest contact with the adhesive and to expel air trapped between the surface and the felt. Wherever possible, the felt should be unrolled into the roofing felt adhesive and rolled with a light roller (15 to 25kg).
The overlaps should be at least 75mm on the side and 150mm at the ends. To ensure a complete bond at the side and end laps, Cromar Roofing Felt Adhesive can be applied to the underside of the felt and well compacted.
When using with a timber structure, the first layer of felt must be nailed down. Successive layers of felt may then be bonded using Cromar Roofing Felt Adhesive.
When used on concrete surfaces that are porous, it will be necessary to prime the surface first, ensuring that the primer is completely dry before the first layer of felt is applied.
Twenty-four hours after laying felt, check all bondings to ensure that full adhesive has been obtained. Mainly check all laps.
