Easy-Trim Ridge F Universal Dry Ridge System - 6m Kit (Pallet of 84 Boxes) 
Cromar Vent 3 Air High Performance Breathable Membrane 1m x 50m 
ALM Code 7 Milled Lead - 1200mm x 3m 
ALM Code 8 Milled Lead - 1000mm x 3m 
Everbuild Salt-Away Salt Remover – 5 Litre 
Restec GRPROOF 1010 Top Coat Resin - 20kg 
Soudal Genius Gun Pipe & Plumbing Foam – 600ml 
ALM Code 3 Milled Lead - 360mm x 3m 
Sikagard Woodworm Killer - 5 Litre 
Bond It Multi-Purpose Powder Filler - White 1.5Kg 
Bond It Expanding Foam Cleaning Fluid - Clear 500ml 
Everbuild Silicone Eater Silicone Sealant Remover - 100ml (Box of 12) 
Ronseal 3 in 1 Basecoat - White 2.5L 
Soudal Exterior Frame Silicone - Brown 270ml (Box of 12) 
Thompson's One Coat Waterseal - 1L 
Soudal B2 Fire Rated Expanding Foam Gun Grade - 750ml (Box of 12) 
Everbuild 503 SBR Bond – 5 Litre 
FloPlast Round Line Downpipe Clip, Black 
Everbuild Forever Ivory Silicone Sealant – 295ml 
Everbuild Black Jack 908 DPM – 5 Litre 
Sika Mould Buster – 5 Litre 
Freeflow 65mm Square Gutter Drain Pipe 112° Branch - White 
Bond It Stain Block - 400ml Off White 
Everbuild Opti-Mix Mortar Plasticiser - 1 Litre (Box of 12) 
FloPlast Half Round Downpipe Branch 67.5°, White 
Ulti-Mate Bold Roll Brown Tile Vent 
Ronseal Quick Drying Radiator Spray Paint - White Satin 400ml 
ALM Code 4 Milled Lead - 390mm x 3m 
Bostik Flexacryl Instant Repair Waterproofing - Grey 5kg 
Everbuild 503 SBR Bond – 2.5 Litre 
Siroflex Trade Superglue Activator Spray - 400ml 
Code 5 Cast Lead - 800mm x 6m 
Bond It PVA & Adhesive Sealer - White 5L 
Everbuild Firefoam B1 Gun Grade Expanding Foam - Pink 750ml 
Soudal Gun & Foam Cleaner Gun Grade - 500ml (Box of 12) 
Everbuild No Waste Foam – 750ml 
Timloc Eaves Comb Filler 1m Roof Felt Adhesives
Best Sellers
-
Irwin T20 Torx Screwdriver Bits – (Quantity 10)
£9.99 Incl VAT £8.33 Excl VAT Read more -
Freeflow Square Gutter System Gutter 90° Angle – White
£3.49 Incl VAT £2.91 Excl VAT Read more -
Code 3 Cast Lead – 510mm x 3m
£65.69 Incl VAT £54.74 Excl VAT Add to basket -
Timco Solo Woodscrew Mixed Tray
£19.99 Incl VAT £16.66 Excl VAT Read more -
Code 8 Cast Lead – 360mm x 6m
£248.47 Incl VAT £207.06 Excl VAT Add to basket -
OX Pro 4 In 1 Heavy Duty Staple Gun
£23.99 Incl VAT £19.99 Excl VAT Read more
Roof Felt Adhesives
Browse through our range of roof felt adhesives. At ERoofing, we stock a substantial range of high-quality felt adhesive that come in ranging sizes from 1 litre to 25 litre.
Applying Felt Adhesive
You must apply felt adhesive either using a stiff brush, mop or squeegee. To avoid thickening in cold weather, stock the felt adhesive in a warm room before — for more straightforward application.
Cromar Roofing Felt Adhesive, in particular, should be applied to the surface and left for 15 to 30 minutes (depending upon drying conditions) to develop its full thickness.
The felt should then be placed into the wet adhesive film carefully, rubbing or rolling each section down to ensure highest contact with the adhesive and to expel air trapped between the surface and the felt. Wherever possible, the felt should be unrolled into the roofing felt adhesive and rolled with a light roller (15 to 25kg).
The overlaps should be at least 75mm on the side and 150mm at the ends. To ensure a complete bond at the side and end laps, Cromar Roofing Felt Adhesive can be applied to the underside of the felt and well compacted.
When using with a timber structure, the first layer of felt must be nailed down. Successive layers of felt may then be bonded using Cromar Roofing Felt Adhesive.
When used on concrete surfaces that are porous, it will be necessary to prime the surface first, ensuring that the primer is completely dry before the first layer of felt is applied.
Twenty-four hours after laying felt, check all bondings to ensure that full adhesive has been obtained. Mainly check all laps.
