Code 8 Cast Lead - 180mm x 6m 
Bond It Bitumen Primer - Black 5L 
Soudafoam Window & Door Xtra Gun Grade, Champagne - 750ml 
Bond It Bitumen Primer - Black 2.5L 
FloPlast Half Round Gutter Union, Brown 
Permavent Eco Breather Membrane 1m x 50m 
Soudal Manual Foil Pack Gun Aluminium, 600ml (Sealant Gun for Sausages) 
Everbuild Caulk Once – White 380ml 
Patination Oil Lead Mate Flashing Protection Coating - 500ML 
Everbuild Triple Action Wood Treatment – 25 Litre 
Timco 25 Spanner Set 
Everbuild Stick2 Spray Contact Adhesive – Beige 500ml 
Code 5 Cast Lead - 1600mm x 3m 
Everbuild 501 PVA – 500ml 
Bondit Monster Mesh Pink 50m x 1m - 160g/m2 
Easy-Trim Lead R Flashing Textured – 150mm x 5m 
ALM Code 5 Milled Lead - 390mm x 6m 
Ronseal Stays White 2in1 Paint & Primer - Matt 750ml 
Ronseal Multi Purpose Filler Smooth Finish Powder - 2Kg 
ALM Code 3 Milled Lead - 600mm x 3m 
Ronseal Quick Drying Stain Block - Aerosol White 
Hambleside Danelaw Single Pantile Roof Tile Vent, TV10/8 - Antique Red (Box of 5) 
Sika MaxMix Waterproofer - 1 Litre 
Everbuild All Purpose Wallpaper Paste (Hangs 30 Rolls) 
Soudal Genius Gun Soudafoam Window and Door - 600ml 
Soudal Butyrub Non-Setting Mastic - Black 300ml Roof Felt Adhesives
Best Sellers
-
Aluflow Rock N Lock Gutter Bracket – (Black, Grey or White)
From: £6.25 Incl VAT £5.21 Excl VAT Select options This product has multiple variants. The options may be chosen on the product page -
Bond It Mega Stik PU Adhesive – Beige 750ml
£8.99 Incl VAT £7.49 Excl VAT Add to basket -
Timloc Mini Castellated Tile Vent Brown (Box of 14)
£279.86 Incl VAT £233.22 Excl VAT Add to basket -
Everbuild Smart Tack Handy – 500ml
£8.99 Incl VAT £7.49 Excl VAT Add to basket -
84 x Eridge Dry Fix Ridge System Black – 6M Kit
£2,478.00 Incl VAT £2,065.00 Excl VAT Read more -
Everbuild Seal Rite Strip Out Tool
£7.99 Incl VAT £6.66 Excl VAT Add to basket
Roof Felt Adhesives
Browse through our range of roof felt adhesives. At ERoofing, we stock a substantial range of high-quality felt adhesive that come in ranging sizes from 1 litre to 25 litre.
Applying Felt Adhesive
You must apply felt adhesive either using a stiff brush, mop or squeegee. To avoid thickening in cold weather, stock the felt adhesive in a warm room before — for more straightforward application.
Cromar Roofing Felt Adhesive, in particular, should be applied to the surface and left for 15 to 30 minutes (depending upon drying conditions) to develop its full thickness.
The felt should then be placed into the wet adhesive film carefully, rubbing or rolling each section down to ensure highest contact with the adhesive and to expel air trapped between the surface and the felt. Wherever possible, the felt should be unrolled into the roofing felt adhesive and rolled with a light roller (15 to 25kg).
The overlaps should be at least 75mm on the side and 150mm at the ends. To ensure a complete bond at the side and end laps, Cromar Roofing Felt Adhesive can be applied to the underside of the felt and well compacted.
When using with a timber structure, the first layer of felt must be nailed down. Successive layers of felt may then be bonded using Cromar Roofing Felt Adhesive.
When used on concrete surfaces that are porous, it will be necessary to prime the surface first, ensuring that the primer is completely dry before the first layer of felt is applied.
Twenty-four hours after laying felt, check all bondings to ensure that full adhesive has been obtained. Mainly check all laps.
