Ronseal One Coat Stays White Radiator Paint - Gloss 750ml 
Timco Aluminium Hawk 
OX Heavy Duty Soft Gel Filled Knee Pad 
Siroflex Trade High Viscosity Superglue - 50g 
Thompson's Stain Block Damp Seal - White 250ml 
OX Tools Pro Torpedo Level, 9" / 230mm 
Cromar Acrypol+ Plus Roof Coating Waterproof System - Grey 2.5kg 
Ronseal Ultra Tough Hardglaze Clear Varnish - 750ml 
Soudal B2 Fire Rated Expanding Foam Gun Grade - 750ml 
Restec Flexitec 2020 Roofing Kit - (10m²) 
Soudal Soudafoam Window & Door Gun Grade – 750ml (Box of 12) 
Bond It Contractors Grade PVA - White 500ml 
FloPlast Ogee Fascia Bracket, White 
Soudal 30 Minute Bond D4 PU Wood Adhesive Liquid – 750g (Box of 12) 
Timloc Underlay Felt Lap Vent (Pack of 10) 
Everbuild Febond PVA - 5L 
FloPlast Square Line External Stop End Black – 114mm 
Soudal Brake Cleaner - 400ml 
Bond It Bath Mate Bath & Kitchen Sealant - White EU3 
Soudal Silicone Spray - 400ml 
Bond It Aerosol Spray Adhesive - 500ml Beige 
ALM Code 3 Milled Lead - 450mm x 3m 
Everbuild External Frame Sealant - White 290ml (Box of 12) 
Ulti-Mate Ulti-Match Plain Tile Vent 
Everbuild Masonry Dry Rot Treatment – 5 Litre 
Timloc Castellated Tile Vent Red (Box of 8) 
Everbuild Stixall Extreme Power - Black 290ml (Box of 12) 
Bond It PVA & Adhesive Sealer - White 5L Roof Felt Adhesives
Best Sellers
-
Code 6 Cast Lead – 914mm x 6m
£471.24 Incl VAT £392.70 Excl VAT Add to basket -
Everbuild 204 Evermix 3 in 1 – 5 Litre
£12.99 Incl VAT £10.83 Excl VAT Add to basket -
Code 3 Cast Lead – 180mm x 3m
£22.85 Incl VAT £19.04 Excl VAT Add to basket -
ALM Code 8 Milled Lead – 1600mm x 6m
£1,093.15 Incl VAT £910.96 Excl VAT Add to basket -
ALUPAVE Flat Roof and Decking Board, Grey, Yellow, Mill
From: £37.33 Incl VAT £31.11 Excl VAT Select options This product has multiple variants. The options may be chosen on the product page -
Bond It Rubber Bitumen Emulsion – Black 2.5L
£15.99 Incl VAT £13.33 Excl VAT Read more
Roof Felt Adhesives
Browse through our range of roof felt adhesives. At ERoofing, we stock a substantial range of high-quality felt adhesive that come in ranging sizes from 1 litre to 25 litre.
Applying Felt Adhesive
You must apply felt adhesive either using a stiff brush, mop or squeegee. To avoid thickening in cold weather, stock the felt adhesive in a warm room before — for more straightforward application.
Cromar Roofing Felt Adhesive, in particular, should be applied to the surface and left for 15 to 30 minutes (depending upon drying conditions) to develop its full thickness.
The felt should then be placed into the wet adhesive film carefully, rubbing or rolling each section down to ensure highest contact with the adhesive and to expel air trapped between the surface and the felt. Wherever possible, the felt should be unrolled into the roofing felt adhesive and rolled with a light roller (15 to 25kg).
The overlaps should be at least 75mm on the side and 150mm at the ends. To ensure a complete bond at the side and end laps, Cromar Roofing Felt Adhesive can be applied to the underside of the felt and well compacted.
When using with a timber structure, the first layer of felt must be nailed down. Successive layers of felt may then be bonded using Cromar Roofing Felt Adhesive.
When used on concrete surfaces that are porous, it will be necessary to prime the surface first, ensuring that the primer is completely dry before the first layer of felt is applied.
Twenty-four hours after laying felt, check all bondings to ensure that full adhesive has been obtained. Mainly check all laps.
