FloPlast Half Round External Stop End, White – 112mm 
Everbuild PVCu Acti-Spray – Clear 200ml (Box of 12) 
Code 5 Cast Lead - 1200mm x 6m 
Code 6 Cast Lead - 800mm x 3m 
Timloc Standard Roof Tile Vent Adaptor 
Everbuild Griptite Construction Adhesive - 350ml 
OX Tools Pro Self Levelling Laser Level - 60m 
Code 7 Cast Lead - 450mm x 6m 
Bostik Cementone PVA - 5 Litre 
Colron Refined Finishing Wax - 325g 
Bond It Pro-Mate LMA Silicone - Translucent EU3 
Soudal Fix ALL High Tack Hybrid Sealant - Invisible 290ml 
Code 8 Cast Lead - 510mm x 3m 
FloPlast Square Line Gutter 90° Black – 114mm 
FloPlast Round Line Downpipe Clip, Black 
Timco Lifting Sling 2000kg / 2 Tonnes 
Everbuild Caulk Once – White 295ml (Box of 12) 
Bond It Cyanoacrylate Superglue Hi Viscosity - Clear 20g 
Everbuild KOS Fire Cement Buff – 500g 
Everbuild Everflex Contract AC50 Acoustic Sealant & Adhesive - White 900ml 
Timloc 1206 Underfloor Vent Horizontal Rear Extension + 100mm 
Soudal PVCu Solvent Frame Cleaner - 1L (Box of 12) 
Everbuild 209 Liquid Mortar Tone - Black 1 Litre 
Bond It B3 Fill And Fix Expanding Foam Gun Grade - Beige 750ml 
Code 4 Cast Lead - 150mm x 6m 
Timloc 3014C Over Fascia Ventilation System 1M - Black 
Timco Glazing Shovel - 260mm 
Everbuild Black Jack 901 Black Bitumen Paint – 25 Litre 
Bond It Mould Stop - Clear 5L Roof Felt Adhesives
Best Sellers
-
Wabis Universal Dry Ridge System 6m Kit
£35.50 Incl VAT £29.58 Excl VAT Read more -
Code 3 Cast Lead – 180mm x 3m
£22.85 Incl VAT £19.04 Excl VAT Add to basket -
Everbuild Constructa-Pro Adhesive Foam – Grey 750ml (Box of 12)
£99.99 Incl VAT £83.33 Excl VAT Read more -
Timloc Drill Vent Cavity Ventilator
From: £3.99 Incl VAT £3.33 Excl VAT Select options This product has multiple variants. The options may be chosen on the product page -
Everbuild Forever White Grout Reviver – 200ml
£6.99 Incl VAT £5.83 Excl VAT Add to basket -
ALM Code 6 Milled Lead Flashing – 510mm x 3m
£130.27 Incl VAT £108.56 Excl VAT Add to basket
Roof Felt Adhesives
Browse through our range of roof felt adhesives. At ERoofing, we stock a substantial range of high-quality felt adhesive that come in ranging sizes from 1 litre to 25 litre.
Applying Felt Adhesive
You must apply felt adhesive either using a stiff brush, mop or squeegee. To avoid thickening in cold weather, stock the felt adhesive in a warm room before — for more straightforward application.
Cromar Roofing Felt Adhesive, in particular, should be applied to the surface and left for 15 to 30 minutes (depending upon drying conditions) to develop its full thickness.
The felt should then be placed into the wet adhesive film carefully, rubbing or rolling each section down to ensure highest contact with the adhesive and to expel air trapped between the surface and the felt. Wherever possible, the felt should be unrolled into the roofing felt adhesive and rolled with a light roller (15 to 25kg).
The overlaps should be at least 75mm on the side and 150mm at the ends. To ensure a complete bond at the side and end laps, Cromar Roofing Felt Adhesive can be applied to the underside of the felt and well compacted.
When using with a timber structure, the first layer of felt must be nailed down. Successive layers of felt may then be bonded using Cromar Roofing Felt Adhesive.
When used on concrete surfaces that are porous, it will be necessary to prime the surface first, ensuring that the primer is completely dry before the first layer of felt is applied.
Twenty-four hours after laying felt, check all bondings to ensure that full adhesive has been obtained. Mainly check all laps.
