Klober Profile-Line Limarech Tile Vent - Slate Grey KG9859-3-0429 (Box of 10) 
Siroflex Painters Caulk-It - 310ml 
Thompson's One Coat Waterseal - 2.5L 
ALM Code 5 Milled Lead - 1200mm x 6m 
Circular Soffit Vent, Brown 
Bond It 30 Minute PU Wood Adhesive - Brown 750g 
Klober 15x9 Tile Vent - Slate Grey KG9690-0429 (Box of 10) 
Timloc Single Pantile Tile Vent Grey (Box of 11) 
Code 6 Cast Lead - 600mm x 6m 
Code 7 Cast Lead - 360mm x 6m 
Ulti-Mate 10K Slate Vent Adaptor 
ALM Code 4 Milled Lead - 390mm x 6m 
Everbuild Everflex Heat Mate Sealant - Red 295ml 
FloPlast Round 92½° Bend - White 
Colron Liquid Scratch Cover - Light 14ml 
Cromar Bitumen Trowel Mastic - Black 5L 
Everbuild Black Jack 904 Roof Felt Adhesive – 5 Litre 
OX Pro Brick Hammer - 24 oz 
Klober Uni Angle Ridge End Cap, Black 
ALM Code 3 Milled Lead - 450mm x 3m 
Soudafoam Gap Filler Gun Grade – 750ml (Box of 12) 
Timco Copper Disc Rivets 
Timco Chalk Line Set 
Bond It One Hit Wonder Lightweight Filler - White 1L 
Bond It Duct Tape - Black 48mm x 45M 
Code 5 Cast Lead - 210mm x 6m 
Sika AnchorFix®-1 Fast Cure Anchoring Adhesive System - Light Grey 300ml 
Klober Universal Vent 110mm Adaptor - KG968300-1 
Bond It Aluminium Solar Reflective Paint - Silver 5L 
Ronseal Wet Rot Wood Hardener - 250ml 
Timco FirmaHold Collated Brad A2 Stainless Steel Nails - 16G x 38mm (2000 Pieces) 
OX Pro Magnetic Level 600mm 
Code 8 Cast Lead - 760mm x 3m 
Freeflow 112mm Round Gutter System Stopend Outlet - White 
Everbuild Jetcem Rapid Repair Cement – 6kg 
Everbuild Pro Blue Masking Tape - 25mm x 33mm 
Samac Stainless Steel Cladding Pins - 30mm x 2.0mm (Box of 250) Roof Felt Adhesives
Best Sellers
-
Everbuild Black Jack 906 Bitumen Roofing Emulsion – 5 Litre
£29.99 Incl VAT £24.99 Excl VAT Add to basket -
Cromar Protect 1F Non-Breathable Roofing Felt – 1m x 15m
£18.99 Incl VAT £15.83 Excl VAT Add to basket -
Axgard 3mm Solid Polycarbonate Sheet, Opal
From: £16.04 Incl VAT £13.37 Excl VAT Select options This product has multiple variants. The options may be chosen on the product page -
Code 4 Cast Lead – 510mm x 3m
£88.54 Incl VAT £73.78 Excl VAT Add to basket -
ALUKAP-XR 45mm Bar, RAL Powder Coat
From: £140.69 Incl VAT £117.24 Excl VAT Select options This product has multiple variants. The options may be chosen on the product page -
Gorilla Super Glue Gel Twin Pack – Clear 3g
£5.99 Incl VAT £4.99 Excl VAT Add to basket
Roof Felt Adhesives
Browse through our range of roof felt adhesives. At ERoofing, we stock a substantial range of high-quality felt adhesive that come in ranging sizes from 1 litre to 25 litre.
Applying Felt Adhesive
You must apply felt adhesive either using a stiff brush, mop or squeegee. To avoid thickening in cold weather, stock the felt adhesive in a warm room before — for more straightforward application.
Cromar Roofing Felt Adhesive, in particular, should be applied to the surface and left for 15 to 30 minutes (depending upon drying conditions) to develop its full thickness.
The felt should then be placed into the wet adhesive film carefully, rubbing or rolling each section down to ensure highest contact with the adhesive and to expel air trapped between the surface and the felt. Wherever possible, the felt should be unrolled into the roofing felt adhesive and rolled with a light roller (15 to 25kg).
The overlaps should be at least 75mm on the side and 150mm at the ends. To ensure a complete bond at the side and end laps, Cromar Roofing Felt Adhesive can be applied to the underside of the felt and well compacted.
When using with a timber structure, the first layer of felt must be nailed down. Successive layers of felt may then be bonded using Cromar Roofing Felt Adhesive.
When used on concrete surfaces that are porous, it will be necessary to prime the surface first, ensuring that the primer is completely dry before the first layer of felt is applied.
Twenty-four hours after laying felt, check all bondings to ensure that full adhesive has been obtained. Mainly check all laps.
