Timloc Single Pantile Tile Vent Red (Box of 11) 
Klober Single Pantile Vent - Brown KG9860-0247 (Box of 10) 
Bond It Gripbond Pro Max Adhesive - White EU3 
Klober 15x9 Tile Vent - Terracotta KG9690-0152 (Box of 10) 
Bond It Oil Stain Remover - White 1L 
FloPlast Square Line Gutter Angle 135° Black 
84 x Eridge Dry Fix Ridge System Black - 6M Kit 
Lead Hall Fixing Clips - Pack of 50 
Code 7 Cast Lead - 150mm x 3m 
Bond It Mould Stop - Clear 5L 
Bond It A70 Studlock Anaerobic High Strength Adhesive - 25ml Green 
Klober Uni-line Vent Slate Grey 
Code 5 Cast Lead - 240mm x 3m 
Klober Universal Tile Vent Terracotta KG9854 (Box of 10) 
Everflex Contract 125 One Hour Caulk, White - 300ml (Box of 25) 
OX Pro Heavy Duty Aviation Snips Straight Cut (Yellow) 
Everbuild Black Jack 907 Solar Reflective Paint – 5 Litre 
ERidge Dry Fix Ridge System Black – 6m Kit 
Colron Liquid Scratch Cover - Light 14ml 
FloPlast Square Fascia Bracket Black – 114mm 
Cromar Protect 1F Non-Breathable Roofing Felt – 1m x 45m 
Soudal Repair Express Cement – Beige 290ml (Box of 12) 
Everbuild External Frame Sealant - Stone 290ml (Box of 12) 
Freeflow 112mm Round Gutter System 90° Gutter Angle - White 
Ronseal Diamond Hard Doorstep Paint - Black Satin 250ml 
Everbuild Black Jack 908 DPM – 5 Litre 
Everbuild STICK2® All-Purpose Contact Adhesive – 5 Litre 
Bond It Caulk-Mate One Hour Decorators Caulk - White EU3 Roof Felt Adhesives
Best Sellers
-
Soudal PVCu Gap Filler, White – 300ml (Box of 12)
£82.68 Incl VAT £68.90 Excl VAT Add to basket -
ALM Code 8 Milled Lead – 180mm x 3m
£62.30 Incl VAT £51.92 Excl VAT Add to basket -
Everbuild 404 Fungicidal Wash – 1 Litre
£7.99 Incl VAT £6.66 Excl VAT Add to basket -
Timco Velocity Premium Multi-Use Screws – Mixed Tray
£23.99 Incl VAT £19.99 Excl VAT Add to basket -
Permavent Max 1m x 50m
£52.99 Incl VAT £44.16 Excl VAT Read more -
Everbuild Everflex Heat Mate Sealant – Black 295ml
£10.99 Incl VAT £9.16 Excl VAT Read more
Roof Felt Adhesives
Browse through our range of roof felt adhesives. At ERoofing, we stock a substantial range of high-quality felt adhesive that come in ranging sizes from 1 litre to 25 litre.
Applying Felt Adhesive
You must apply felt adhesive either using a stiff brush, mop or squeegee. To avoid thickening in cold weather, stock the felt adhesive in a warm room before — for more straightforward application.
Cromar Roofing Felt Adhesive, in particular, should be applied to the surface and left for 15 to 30 minutes (depending upon drying conditions) to develop its full thickness.
The felt should then be placed into the wet adhesive film carefully, rubbing or rolling each section down to ensure highest contact with the adhesive and to expel air trapped between the surface and the felt. Wherever possible, the felt should be unrolled into the roofing felt adhesive and rolled with a light roller (15 to 25kg).
The overlaps should be at least 75mm on the side and 150mm at the ends. To ensure a complete bond at the side and end laps, Cromar Roofing Felt Adhesive can be applied to the underside of the felt and well compacted.
When using with a timber structure, the first layer of felt must be nailed down. Successive layers of felt may then be bonded using Cromar Roofing Felt Adhesive.
When used on concrete surfaces that are porous, it will be necessary to prime the surface first, ensuring that the primer is completely dry before the first layer of felt is applied.
Twenty-four hours after laying felt, check all bondings to ensure that full adhesive has been obtained. Mainly check all laps.
