Everbuild Everflex Lead Mate Sealant Grey - 295ml (Box of 25) 
Bond It Aluminium Foil Tape - 75mm x 45M 
Everbuild Everflex Premium+ 500 Bath & Sanitary Silicone - White 295ml (Box of 25) 
ALM Code 6 Milled Lead Flashing - 1000mm x 3m 
Timco Precision Screwdriver Set 6pcs 
Everbuild Everflex Heat Mate Sealant - Red 295ml 
Everbuild Exact Gap Foam - 750ml (Box of 12) 
Hambleside Danelaw CON6+ Dry Ridge 6m Kit 
Over Fascia Vent, 25mm Single 
Bond It Pro-Mate LMA Silicone - White EU3 
Ox Pro Ultraflex Finishing Trowel - 16" (405mm x 110mm) 
Everbuild B1 Hand Held Expanding Fire Rated Foam - Pink 750 ml 
ALM Code 3 Milled Lead - 240mm x 6m 
OX Pro Heavy Duty Aviation Snips Straight Cut (Yellow) 
Bond It Stain Block - 400ml Off White 
Everbuild All Purpose Wallpaper Paste (Hangs 30 Rolls) 
TIMCO Precision Screwdriver Bit Set -18 Pieces 
Code 5 Cast Lead - 800mm x 3m 
Everbuild EB25 Ultimate Sealant & Adhesive – Black 300ml (Box of 12) 
Everbuild Caulk Once – White 295ml (Box of 12) 
Bond It No Crack Caulk - White 310ml 
ALM Code 7 Milled Lead - 450mm x 3m 
Code 4 Cast Lead - 390mm x 6m 
Everbuild Black Jack 901 Black Bitumen Paint – 5 Litre 
Code 7 Cast Lead - 180mm x 6m Roof Felt Adhesives
Best Sellers
-
FloPlast Square Line Shoe Black – 65mm
£4.99 Incl VAT £4.16 Excl VAT Add to basket -
Soudal Lead Sheet Sealant 290ml – Grey (Box of 12)
£54.00 Incl VAT £45.00 Excl VAT Add to basket -
Code 3 Cast Lead – 390mm x 6m
£99.96 Incl VAT £83.30 Excl VAT Add to basket -
Ronseal One Coat Cupboard Melamine & MDF Paint – Gloss 750ml
From: £25.37 Incl VAT £21.14 Excl VAT Select options This product has multiple variants. The options may be chosen on the product page -
Soudal Manual Foil Pack Gun Aluminium, 600ml (Sealant Gun for Sausages)
£24.99 Incl VAT £20.83 Excl VAT Add to basket -
Hambleside Danelaw Double Plain Tile Vent, TV10/9 – Slate Grey (Box of 5)
£114.99 Incl VAT £95.83 Excl VAT Add to basket
Roof Felt Adhesives
Browse through our range of roof felt adhesives. At ERoofing, we stock a substantial range of high-quality felt adhesive that come in ranging sizes from 1 litre to 25 litre.
Applying Felt Adhesive
You must apply felt adhesive either using a stiff brush, mop or squeegee. To avoid thickening in cold weather, stock the felt adhesive in a warm room before — for more straightforward application.
Cromar Roofing Felt Adhesive, in particular, should be applied to the surface and left for 15 to 30 minutes (depending upon drying conditions) to develop its full thickness.
The felt should then be placed into the wet adhesive film carefully, rubbing or rolling each section down to ensure highest contact with the adhesive and to expel air trapped between the surface and the felt. Wherever possible, the felt should be unrolled into the roofing felt adhesive and rolled with a light roller (15 to 25kg).
The overlaps should be at least 75mm on the side and 150mm at the ends. To ensure a complete bond at the side and end laps, Cromar Roofing Felt Adhesive can be applied to the underside of the felt and well compacted.
When using with a timber structure, the first layer of felt must be nailed down. Successive layers of felt may then be bonded using Cromar Roofing Felt Adhesive.
When used on concrete surfaces that are porous, it will be necessary to prime the surface first, ensuring that the primer is completely dry before the first layer of felt is applied.
Twenty-four hours after laying felt, check all bondings to ensure that full adhesive has been obtained. Mainly check all laps.
