Cromar All Weather Roof Coat – Black 2.5 Litre 
Silweld Repair Tape, Black - 3m 
Everbuild Lumberjack® Woodworm Killer - Clear 5L 
Code 5 Cast Lead - 240mm x 6m 
Everbuild Roof & Gutter Sealant - Black 295ml (Box of 12) 
Code 6 Cast Lead - 360mm x 6m 
Everbuild Caulk Once – White 380ml 
ALM Code 7 Milled Lead - 760mm x 6m 
Leadax Lead Free Flashing Alternative 250mm (6m rolls) 
ALM Code 5 Milled Lead - 180mm x 3m 
Bond It Dustproof & Hardener - Clear 5L 
Hambleside Danelaw Single Pantile Roof Tile Vent, TV10/8 - Brown (Box of 5) 
Ronseal Damp Seal Aerosol - White 400ml 
Everbuild Seal Rite Strip Out Tool 
Soudal Cleaner & Degreaser - 400ml 
OX Pro Tough Bucket, Blue - 15 Litre 
ALM Code 4 Milled Lead - 510mm x 3m 
Thompson's Emergency Roof Seal - Black 2.5L 
Code 3 Cast Lead - 450mm x 6m 
Klober Double Roman Roof Tile Vent - Brown KG9857-3-0247 (Box of 10) 
Hambleside Danelaw MONO6+ Dry Fix Ventilated Mono Ridge System 6m 
Samac Aluminium Annular Ring Nails - 1kg (70mm x 3.35mm) 
BORA Centipede 4ft x 4ft x 30in Unit - 4 X-Cups + 2 Clamp + C/S Bag 
Everbuild Triple Action Wood Treatment – 5 Litre 
Everbuild Lead Mate Patination Oil – 1 Litre 
Cromar ProRidge Universal Ridge System 3m Kit Roof Felt Adhesives
Best Sellers
-
Timco 8 Spanner Set
£12.89 Incl VAT £10.74 Excl VAT Add to basket -
Ronseal High-Performance Wood Filler – 3.75Kg
From: £49.99 Incl VAT £41.66 Excl VAT Select options This product has multiple variants. The options may be chosen on the product page -
Bond It Glass Cleaner – Clear 1L
£6.99 Incl VAT £5.83 Excl VAT Add to basket -
Klober Profile-Line Flat Tile Vent – Black KG9856-3-0450 (Box of 10)
£215.99 Incl VAT £179.99 Excl VAT Read more -
OX Tools Drywall Rasp 250mm
£17.99 Incl VAT £14.99 Excl VAT Add to basket -
Buckbootz BVIZ2 Yellow/Black High Visibility Waterproof Safety Lace Boot
From: £64.99 Incl VAT £64.99 Excl VAT Select options This product has multiple variants. The options may be chosen on the product page
Roof Felt Adhesives
Browse through our range of roof felt adhesives. At ERoofing, we stock a substantial range of high-quality felt adhesive that come in ranging sizes from 1 litre to 25 litre.
Applying Felt Adhesive
You must apply felt adhesive either using a stiff brush, mop or squeegee. To avoid thickening in cold weather, stock the felt adhesive in a warm room before — for more straightforward application.
Cromar Roofing Felt Adhesive, in particular, should be applied to the surface and left for 15 to 30 minutes (depending upon drying conditions) to develop its full thickness.
The felt should then be placed into the wet adhesive film carefully, rubbing or rolling each section down to ensure highest contact with the adhesive and to expel air trapped between the surface and the felt. Wherever possible, the felt should be unrolled into the roofing felt adhesive and rolled with a light roller (15 to 25kg).
The overlaps should be at least 75mm on the side and 150mm at the ends. To ensure a complete bond at the side and end laps, Cromar Roofing Felt Adhesive can be applied to the underside of the felt and well compacted.
When using with a timber structure, the first layer of felt must be nailed down. Successive layers of felt may then be bonded using Cromar Roofing Felt Adhesive.
When used on concrete surfaces that are porous, it will be necessary to prime the surface first, ensuring that the primer is completely dry before the first layer of felt is applied.
Twenty-four hours after laying felt, check all bondings to ensure that full adhesive has been obtained. Mainly check all laps.
