Easy-Trim End Cap Half Round - Black (Box of 10) 
Code 5 Cast Lead - 1600mm x 6m 
Bond It Patination Oil 1L 
Restec CSM Fibreglass Roll 450g/m² - (15m² Roll) 
Spax Magnetic Bit Holder - 1 Piece 
ALM Code 4 Milled Lead - 1000mm x 3m 
Copper Coil 20m x 50mm 
Thompson's Patio & Block Paving Anti-Slip Additive - 200g 
Everbuild Everflex Contract AC95 Intumescent Sealant & Adhesive - 900ml 
Lead Roofing Wood Core Roll (50mm x 2.4m) 
Hambleside Danelaw TV15/4 Tile Vent - Slate Grey (Box of 5) 
Bond It Bitumen Primer - Black 1L 
Cromar Roof Felt Adhesive - Black 2.5 Litre 
Bond It One Hit Wonder Lightweight Filler - White 500ml 
Everbuild KOS Black Fire Cement - 1kg 
Evo-Stik Seriously Strong Stuff Fast Setting Adhesive, White - 290ml 
Everbuild Griptite Construction Adhesive - 350ml 
ALM Code 6 Milled Lead Flashing - 800mm x 3m 
Armatool Flooring Kneepads 
Bond It PVA & Adhesive Sealer - White 5L 
Ronseal Stays White Ultra Tough White Matt Paint - 750ML 
Ronseal Expanding Foam Filler - 500ml 
Ronseal Crystal Clear Outdoor Varnish - Matt 2.5L 
Ulti-Mate Forticrete SL8 Grey Tile Vent 
Everflex Contract 125 One Hour Caulk, White - 300ml (Box of 25) 
Everbuild EB25 Ultimate Sealant & Adhesive – Clear 300ml (Box of 12) 
Everbuild Lead Mate Patination Oil – 1 Litre 
Resiblock Indian Sandstone Sealer Invisible - 5 Litre 
Everbuild Multi-Stick - White 350ml (Box of 12) 
Ronseal Stays White One Coat Non-Drip Paint - Matt 750ml Roof Felt Adhesives
Best Sellers
-
Timloc Castellated Tile Vent Grey (Box of 8)
£159.84 Incl VAT £133.20 Excl VAT Add to basket -
Easy-Trim End Cap – Half Round
From: £4.99 Incl VAT £4.16 Excl VAT Select options This product has multiple variants. The options may be chosen on the product page -
OX Pro Impact Drill & Drive Accessory Set – 40 Piece
£34.99 Incl VAT £29.16 Excl VAT Add to basket -
Siroflex SX Trade Strength Mortar Repair Cement – Buff 300ml
£10.99 Incl VAT £9.16 Excl VAT Read more -
Corrapol PVC DIY Grade Wall Flashing
£20.12 Incl VAT £16.77 Excl VAT Read more -
JCB Grey Trade T-Shirt
From: £11.30 Incl VAT £9.42 Excl VAT Select options This product has multiple variants. The options may be chosen on the product page
Roof Felt Adhesives
Browse through our range of roof felt adhesives. At ERoofing, we stock a substantial range of high-quality felt adhesive that come in ranging sizes from 1 litre to 25 litre.
Applying Felt Adhesive
You must apply felt adhesive either using a stiff brush, mop or squeegee. To avoid thickening in cold weather, stock the felt adhesive in a warm room before — for more straightforward application.
Cromar Roofing Felt Adhesive, in particular, should be applied to the surface and left for 15 to 30 minutes (depending upon drying conditions) to develop its full thickness.
The felt should then be placed into the wet adhesive film carefully, rubbing or rolling each section down to ensure highest contact with the adhesive and to expel air trapped between the surface and the felt. Wherever possible, the felt should be unrolled into the roofing felt adhesive and rolled with a light roller (15 to 25kg).
The overlaps should be at least 75mm on the side and 150mm at the ends. To ensure a complete bond at the side and end laps, Cromar Roofing Felt Adhesive can be applied to the underside of the felt and well compacted.
When using with a timber structure, the first layer of felt must be nailed down. Successive layers of felt may then be bonded using Cromar Roofing Felt Adhesive.
When used on concrete surfaces that are porous, it will be necessary to prime the surface first, ensuring that the primer is completely dry before the first layer of felt is applied.
Twenty-four hours after laying felt, check all bondings to ensure that full adhesive has been obtained. Mainly check all laps.
