Easy-Trim End Cap Angled - Black (Box of 10) 
Code 7 Cast Lead - 240mm x 3m 
Timloc Multi Stepped Duct Adaptor (Fits 100/110/125/150mm Duct) 
FloPlast Half Round Downpipe 112° Bend, White 
Bond It All Weather Roofing Compound - Black 25L 
Code 6 Cast Lead - 390mm x 3m 
ALM Code 3 Milled Lead - 600mm x 3m 
IKO Super Shed Felt - Black 8m Roll 
ALM Code 4 Milled Lead - 150mm x 3m 
Timco 6pcs Stubby Screwdriver Assorted Set 
Bond It Patio Seal Paving & Patio Sealer, Clear - 5L 
Everbuild 501 PVA - 1 Litre 
Left Hand Klober Uni-Click Dry Verge Units Terracotta 
Lead Roofing Wood Core Roll (50mm x 2.4m) 
Code 3 Cast Lead - 240mm x 6m 
ALM Code 7 Milled Lead - 760mm x 3m 
Everbuild Mammoth Clear Weatherproof Tape 
Soudal Trade Sanitary Silicone - White 290ml (Box of 12) 
Timco Air Wedge 
OX Pro Mini Round Point Shovel 
Bond It PVA & Adhesive Sealer - White 5L 
OX Tools 12 inch / 300mm Trade Plastic Plasterers Mud Pan 
Ulti-Mate Bold Roll Brown Tile Vent 
Irwin Jack Plus 880 Universal Handsaw - 20" (Pack of 10) Roof Felt Adhesives
Best Sellers
-
Everbuild Anchorset Green 150 – Grey 150ml
£6.99 Incl VAT £5.83 Excl VAT Add to basket -
Timco Metal Cavity Anchors – M5 x 37 (45mm Screw) Pack of 70
£10.50 Incl VAT £8.75 Excl VAT Add to basket -
Ronseal Anti-Condensation Paint – White 2.5L
£34.99 Incl VAT £29.16 Excl VAT Add to basket -
Securbond Flashing Tape – 10m
From: £49.47 Incl VAT £41.23 Excl VAT Select options This product has multiple variants. The options may be chosen on the product page -
OX Trade Black Rubber Mallet – 16 oz
From: £7.49 Incl VAT £6.24 Excl VAT Select options This product has multiple variants. The options may be chosen on the product page -
Timloc Castellated Tile Vent Grey (Box of 8)
£159.84 Incl VAT £133.20 Excl VAT Add to basket
Roof Felt Adhesives
Browse through our range of roof felt adhesives. At ERoofing, we stock a substantial range of high-quality felt adhesive that come in ranging sizes from 1 litre to 25 litre.
Applying Felt Adhesive
You must apply felt adhesive either using a stiff brush, mop or squeegee. To avoid thickening in cold weather, stock the felt adhesive in a warm room before — for more straightforward application.
Cromar Roofing Felt Adhesive, in particular, should be applied to the surface and left for 15 to 30 minutes (depending upon drying conditions) to develop its full thickness.
The felt should then be placed into the wet adhesive film carefully, rubbing or rolling each section down to ensure highest contact with the adhesive and to expel air trapped between the surface and the felt. Wherever possible, the felt should be unrolled into the roofing felt adhesive and rolled with a light roller (15 to 25kg).
The overlaps should be at least 75mm on the side and 150mm at the ends. To ensure a complete bond at the side and end laps, Cromar Roofing Felt Adhesive can be applied to the underside of the felt and well compacted.
When using with a timber structure, the first layer of felt must be nailed down. Successive layers of felt may then be bonded using Cromar Roofing Felt Adhesive.
When used on concrete surfaces that are porous, it will be necessary to prime the surface first, ensuring that the primer is completely dry before the first layer of felt is applied.
Twenty-four hours after laying felt, check all bondings to ensure that full adhesive has been obtained. Mainly check all laps.
