Everbuild Opti-Mix 3-in-1 Render Additive – 1 Litre 
Restec 1010 Liquid Catalyst - 5kg 
ALM Code 3 Milled Lead - 240mm x 6m 
Soudal Repair Express Cement – Grey 290ml (Box of 12) 
Everbuild Black Jack 907 Solar Reflective Paint – 5 Litre 
Everbuild Stixall Extreme Power - Black 290ml (Box of 12) 
FaithFull Soft Grip Chisel - 4 Piece Set 
Everbuild Everflex Lead Mate Sealant Grey - 295ml (Box of 25) 
FloPlast Half Round Internal Stop End, Black – 112mm 
ALM Code 4 Milled Lead - 800mm x 3m 
FloPlast Square Line Shoe White – 65mm 
Code 8 Cast Lead - 800mm x 6m 
Timco Mixed Plasterboard Fixings 
ALM Code 5 Milled Lead - 1000mm x 3m 
Ronseal Knot Block Primer & Undercoat - White 250ml 
Bond It Economy Sealant Gun - Blue 300ml 
Code 3 Cast Lead - 240mm x 3m 
Hambleside Danelaw Single Pantile Roof Tile Vent, TV10/8 - Terracotta (Box of 5) 
OX Tools 12 inch / 300mm Pro Stainless Steel Plasterers Mud Pan 
Bond It Aluminium Foil Tape - 100mm x 45M 
Everbuild Resiblock Trade – Clear 5 Litre 
Timloc Non-Profile Tile Vent Black (Box of 8) 
Leadax Lead Free Flashing Alternative 450mm (6M Rolls) 
Code 7 Cast Lead - 210mm x 3m 
Right Hand Klober Uni-Click Dry Verge Units Terracotta 
Ronseal 6 Year Anti Mould Paint - White Matt 2.5L 
Soudal Fix ALL Turbo - White 290ml 
Eco-Shovel & Hard Brush Black Large Pan 
Bond It Professional Foam Gun Applicator 
80 x Hambleside Danelaw CON6+ Dry Ridge 6m Kit 
OB1 Diamond Crystal Clear Universal Sealant & Adhesive 290ml 
ALM Code 8 Milled Lead - 240mm x 6m 
EVO-STIK Sticks Like All Weather Adhesive - Clear 290ml 
Everbuild Maximum Torque - White 290ml (Box of 12) 
Copper Coil 20m x 50mm 
Easy-Trim Over Fascia Vent - 25mm x 500mm (Box of 50) 
Standard Brush 4-Inch 
Easy-Trim Lead R Flashing Smooth – 150mm x 5m 
OX Pro Top Steady Nail-On (Full Kit) Clamp Set 
Timco FirmaHold Collated Brad A2 Stainless Steel Nails - 16G x 50mm (2000 Pieces) 
Bond It Cyanoacrylate Superglue Hi Viscosity - Clear 20g Roof Felt Adhesives
Best Sellers
-
JCB Black Trade T-Shirt
From: £11.30 Incl VAT £9.42 Excl VAT Select options This product has multiple variants. The options may be chosen on the product page -
Code 6 Cast Lead – 210mm x 3m
£54.26 Incl VAT £45.22 Excl VAT Add to basket -
FloPlast Round Line Downpipe Clip, Black
£1.99 Incl VAT £1.66 Excl VAT Add to basket -
Felt Support Tray – 1.5m
£1.99 Incl VAT £1.66 Excl VAT Add to basket -
Soudal Grip ALL Solvent-Free – White 290ml
£5.99 Incl VAT £4.99 Excl VAT Add to basket -
Bond It WP70 Neutral Cure Oxime Silicone – EU3
From: £5.80 Incl VAT £4.83 Excl VAT Select options This product has multiple variants. The options may be chosen on the product page
Roof Felt Adhesives
Browse through our range of roof felt adhesives. At ERoofing, we stock a substantial range of high-quality felt adhesive that come in ranging sizes from 1 litre to 25 litre.
Applying Felt Adhesive
You must apply felt adhesive either using a stiff brush, mop or squeegee. To avoid thickening in cold weather, stock the felt adhesive in a warm room before — for more straightforward application.
Cromar Roofing Felt Adhesive, in particular, should be applied to the surface and left for 15 to 30 minutes (depending upon drying conditions) to develop its full thickness.
The felt should then be placed into the wet adhesive film carefully, rubbing or rolling each section down to ensure highest contact with the adhesive and to expel air trapped between the surface and the felt. Wherever possible, the felt should be unrolled into the roofing felt adhesive and rolled with a light roller (15 to 25kg).
The overlaps should be at least 75mm on the side and 150mm at the ends. To ensure a complete bond at the side and end laps, Cromar Roofing Felt Adhesive can be applied to the underside of the felt and well compacted.
When using with a timber structure, the first layer of felt must be nailed down. Successive layers of felt may then be bonded using Cromar Roofing Felt Adhesive.
When used on concrete surfaces that are porous, it will be necessary to prime the surface first, ensuring that the primer is completely dry before the first layer of felt is applied.
Twenty-four hours after laying felt, check all bondings to ensure that full adhesive has been obtained. Mainly check all laps.
