Soudal Pro 40P PU Wood Adhesive - 750g 
Timloc Plastic Insulation Retaining Discs - 80mm Red 
Ronseal uPVC Paint - Black Satin 2.5L 
Bond It Wood Pro High Strength Flexible Hybrid Adhesive - EU3 Buff 
Bond It B2 Expanding PU Foam - Beige 750ml 
ALM Code 6 Milled Lead Flashing - 850mm x 3m 
OB41 Electrical Contact Cleaner - 400ml 
Everbuild Stick2 Rapid Epoxy Tube (2 x 12ml) 
OX Trade Torpedo Level 230mm / 9in 
Code 5 Cast Lead - 850mm x 6m 
Soudal Compact Foam Gun PU Foam 
Everbuild Salt-Away Sprayable Salt Remover – 1 Litre 
Everbuild Lumberjack 30 Minute PU Wood Adhesive Liquid – 750ml (Box of 12) 
Soudal Trade All Weather Sealant - Clear 290ml 
Soudal Neutral Stay Fresh Sanitary Silicone Sealant – White 300ml 
Samac Snowguard - 225mm x 2m 
42 x ERidge Dry Fix Ridge System Black – 6m Kit 
Spax Magnetic Bit Holder - 1 Piece 
Bond It All Weather Roofing Compound - Black 5L 
Irwin Jack Plus 880 Universal Handsaw - 20" 
Everbuild Glass Protector - Red (600mm x 25m) 
Easy-Trim Universal Dry Verge Unit - Black 
FloPlast Square Line Internal Stop End Black – 114mm 
Ronseal Anti-Bacterial Worktop Oil - Clear 500ml 
Timco 30mm Cladding Pin - 250 Pieces 
Everbuild Stick2 Carpet Fix Spray - 500ml 
Soudal PU Plasterboard Adhesive - Genius Gun Flashing Tape
Best Sellers
-
Bond It Monster Scrim Drywall Tape – White 100mm x 90m
£8.99 Incl VAT £7.49 Excl VAT Add to basket -
Bond It One Hit Wonder Lightweight Filler – White 500ml
£8.99 Incl VAT £7.49 Excl VAT Add to basket -
Samac Galvanised ELH Felt Nails – 30mm x 3.00mm
From: £6.70 Incl VAT £5.58 Excl VAT Select options This product has multiple variants. The options may be chosen on the product page -
Manthorpe G1105 Flash Vent – 3m Roll
£54.95 Incl VAT £45.79 Excl VAT Read more -
Thompson’s One Coat Damp Seal – White 750ml
£22.03 Incl VAT £18.36 Excl VAT Add to basket -
Cromar Roofing Flashing Tape Grey – 10m
From: £10.95 Incl VAT £9.13 Excl VAT Select options This product has multiple variants. The options may be chosen on the product page
Flashing Tape
Roofing flashing tape, also known as flashband or lead flashing tape, is one of many ways to protect, repair, and watertight seal something permanently. Due to its heat resistance and ability to provide an immediate watertight seal on an enormous variety of surfaces, it is an essential part of any roofing project. In addition, it comes in multiple sizes to suit your roof needs.Â
Among our range, we have the excellent Cromar Flashing Tape, Bostik Flashing Tape and Everbuild’s flashing trade tape.
How To Apply Flashing Tape the Correct Way
To help out, here is a short guide on how to apply flashing tape.
Cut the Flashing Strip to the length required. To avoid any creasing, remove approximately 50mm of backing paper and carefully position the sealing strip. Hold the backing paper firmly and release it steadily from the sealing strip as the product is applied.
Smooth into position using hand pressure. Use a seam roller or rounded wood smooth to ensure good contact and expel any air, especially on overlaps and at the edges. When laying adjacent rolls, Flashing Strip should be overlapped by a minimum of 25mm for a watertight seal.Â
The seam must be pressed firmly with a hand roller paying particular attention at the point of overlap. Remember, if applying this in cold weather (5-15 Celsius), storing the flashing tape in a warm place is highly recommended before use. If possible, it is also suggested to warm up the surface slightly.
