OX Pro 7 Piece Screwdriver Set 
Code 7 Cast Lead - 390mm x 3m 
Evo-Stik Roof & Gutter Sealant - Black 290ml 
Timco Nut Mix Grab Pack - 980 Pieces 
Soudal Insulating Foam Genius Gun 750ml - Champagne (Box of 12) 
SikaGard Wood Preserver - Clear 5 Litre 
Ronseal Exterior Yacht Varnish - Gloss 2.5L 
Cromar Cold Gritting Solution - Black 25 Litres 
Code 8 Cast Lead - 850mm x 6m 
Timco Assorted Horseshoe Shims - 1.0 to 6.0mm (Box of 200) 
Everbuild Lumberjack 5 Minute Wood Adhesive Deal 
SikaFlex EBT+ Polyurethane Adhesive & Sealant, White - 300ml (Box of 12) 
Bond It Trowel Mastic - Black 1L 
Bond It Lightweight Render Mesh - 50m x 1m (Pink) 
Soudal Repair Express Cement – Grey 900ml 
ALM Code 5 Milled Lead - 760mm x 3m 
Cromar Vent 3 Pro Breathable Membrane 1m x 50m 
OX Pro Top Steady Nail-On (Full Kit) Clamp Set 
Everflex Premium+ 450 Builders Silicone – Grey (Box of 12) 
Bond It Superglue Activator Accelerator Spray Cyanoacrylate Aerosol - 400ml 
Ronseal Stays White 2in1 Paint & Primer - Satin 2.5L 
Timloc Double Roman Tile Vent Brown (Box of 6) 
Bond It Dec-Mate Flexible Filler - White EU3 
Soudal Neutral Stay Fresh Sanitary Silicone Sealant – White 300ml 
Timco Precision Screwdriver Set 6pcs 
Timloc 3014C Over Fascia Ventilation System 1M - Black 
Everbuild 701 Non-Slip Tile Adhesive – White 3.75kg 
Felt Support Tray – 1.5m 
ALM Code 8 Milled Lead - 1200mm x 6m 
FloPlast Half Round To Cast Iron Half Round Gutter Adaptor - Black 
ALM Code 6 Milled Lead Flashing - 510mm x 6m Flashing Tape
Best Sellers
-
Klober Double Pantile Vent – Slate Grey KG9858-3-0429 (Box of 10)
£215.99 Incl VAT £179.99 Excl VAT Read more -
OX Trade 14 Drive Socket Set – 35 Piece
£35.99 Incl VAT £29.99 Excl VAT Add to basket -
IKO Armourglass Plus Roofing Felt Shingles – Green (2m² pack)
£32.45 Incl VAT £27.04 Excl VAT Read more -
Hambleside Danelaw Double Roman Tile Vent, TV15/3 – Slate Grey (Box of 5)
£114.99 Incl VAT £95.83 Excl VAT Add to basket -
Corrapol PVC DIY Grade Wall Flashing
£20.12 Incl VAT £16.77 Excl VAT Read more -
Soudal Genius Gun Gap Filling Foam – 750ml
£9.99 Incl VAT £8.33 Excl VAT Add to basket
Flashing Tape
Roofing flashing tape, also known as flashband or lead flashing tape, is one of many ways to protect, repair, and watertight seal something permanently. Due to its heat resistance and ability to provide an immediate watertight seal on an enormous variety of surfaces, it is an essential part of any roofing project. In addition, it comes in multiple sizes to suit your roof needs.Â
Among our range, we have the excellent Cromar Flashing Tape, Bostik Flashing Tape and Everbuild’s flashing trade tape.
How To Apply Flashing Tape the Correct Way
To help out, here is a short guide on how to apply flashing tape.
Cut the Flashing Strip to the length required. To avoid any creasing, remove approximately 50mm of backing paper and carefully position the sealing strip. Hold the backing paper firmly and release it steadily from the sealing strip as the product is applied.
Smooth into position using hand pressure. Use a seam roller or rounded wood smooth to ensure good contact and expel any air, especially on overlaps and at the edges. When laying adjacent rolls, Flashing Strip should be overlapped by a minimum of 25mm for a watertight seal.Â
The seam must be pressed firmly with a hand roller paying particular attention at the point of overlap. Remember, if applying this in cold weather (5-15 Celsius), storing the flashing tape in a warm place is highly recommended before use. If possible, it is also suggested to warm up the surface slightly.
