ALM Code 6 Milled Lead Flashing - 1000mm x 3m 
ALM Code 4 Milled Lead - 1000mm x 6m 
ALM Code 7 Milled Lead - 210mm x 6m 
Ronseal Exterior Yacht Varnish - Gloss 250ml 
Everbuild Silicone Eater Silicone Sealant Remover - 100ml (Box of 12) 
ALM Code 5 Milled Lead - 300mm x 3m 
Code 3 Cast Lead - 450mm x 3m 
Freeflow 68mm Round Down Pipe Shoe - White 
OX Spectrum Trade XL 3 Core & Accessories Set 
Bond It Mega Foam Gun/Aerosol PU Expanding Foam - Beige 750ml 
Standard Brush 2-Inch 
ALM Code 8 Milled Lead - 800mm x 6m 
FloPlast Half Round Union Unit - Black 
Bond It B2 Expanding PU Foam - Beige 750ml 
Everbuild XT44 Maintenance Spray - 400ml 
Everbuild Aquaseal Liquid Roof – Slate Grey 7kg 
OX Tools OXIT Sealant & Adhesive - Anthracite 290ml (Box of 12) 
Everbuild Everflex Heat Mate Sealant - Red 295ml 
SEAL PRO, Low Modulus Hybrid Universal Sanitary Sealant & Adhesive Bond, White - EU3 
OX Pro Brick Hammer - 24 oz 
Cromar Aluminium Solar Reflective Paint – 2.5 Litre 
OX Trade Stubby Level - 100mm 
Soudal Neoprene Contact Adhesive Liquid Glue 44A – 50ml 
Everbuild Everflex Fire Mate Intumescent Sealant – 295ml Flashing Tape
Best Sellers
-
Ronseal Crystal Clear Outdoor Varnish – Matt 2.5L
£39.99 Incl VAT £33.33 Excl VAT Add to basket -
OX Trade Claw Hammer – 20 oz
£16.65 Incl VAT £13.88 Excl VAT Add to basket -
Soudal Neutral Stay Fresh Sanitary Silicone Sealant – White 300ml
£9.99 Incl VAT £8.33 Excl VAT Add to basket -
Everflex Premium+ 450 Builders Silicone – Buff 300ml (Box of 25)
£132.75 Incl VAT £110.63 Excl VAT Read more -
Ronseal One Coat Blackboard Paint – Black 250ml
£11.99 Incl VAT £9.99 Excl VAT Add to basket -
Easy-Trim Lead R Flashing Textured – 450mm x 5m
£59.65 Incl VAT £49.71 Excl VAT Read more
Flashing Tape
Roofing flashing tape, also known as flashband or lead flashing tape, is one of many ways to protect, repair, and watertight seal something permanently. Due to its heat resistance and ability to provide an immediate watertight seal on an enormous variety of surfaces, it is an essential part of any roofing project. In addition, it comes in multiple sizes to suit your roof needs.
Among our range, we have the excellent Cromar Flashing Tape, Bostik Flashing Tape and Everbuild’s flashing trade tape.
How To Apply Flashing Tape the Correct Way
To help out, here is a short guide on how to apply flashing tape.
Cut the Flashing Strip to the length required. To avoid any creasing, remove approximately 50mm of backing paper and carefully position the sealing strip. Hold the backing paper firmly and release it steadily from the sealing strip as the product is applied.
Smooth into position using hand pressure. Use a seam roller or rounded wood smooth to ensure good contact and expel any air, especially on overlaps and at the edges. When laying adjacent rolls, Flashing Strip should be overlapped by a minimum of 25mm for a watertight seal.
The seam must be pressed firmly with a hand roller paying particular attention at the point of overlap. Remember, if applying this in cold weather (5-15 Celsius), storing the flashing tape in a warm place is highly recommended before use. If possible, it is also suggested to warm up the surface slightly.
