Timco Pozi C2 Strong-Fix Twin Cut Screws - 4.0mm x 40mm (Box of 200) 
Bond It Mould Stop - Clear 2.5L 
Code 8 Cast Lead - 390mm x 3m 
Bond It A70 Studlock Anaerobic High Strength Adhesive - 25ml Green 
ALM Code 5 Milled Lead – 650mm x 6m 
Thompson's One Coat Damp Seal - White 250ml 
Gorilla Super Glue Gel Twin Pack - Clear 3g 
Code 6 Cast Lead - 800mm x 3m 
Code 4 Cast Lead - 180mm x 6m 
ALM Code 7 Milled Lead - 180mm x 3m 
ALM Code 3 Milled Lead - 914mm x 3m 
Hambleside Danelaw Double Pantile Vent TV15/2 - Brown (Box of 5) 
OX Pro Magnetic Level 600mm 
ALM Code 6 Milled Lead Flashing - 914mm x 6m 
Everbuild Everflex 200 Contractors LMA Silicone - White 295ml 
Code 5 Cast Lead - 180mm x 6m 
Bond It Wood Pro High Strength Flexible Hybrid Adhesive - EU3 Buff 
Everbuild Caulk Once – White 295ml 
Ronseal Diamond Hard Floor Varnish - Clear Matt 2.5L 
OX Pro Heavy Duty Aviation Snips Straight Cut (Yellow) 
Everbuild Everflex Premium+ 500 Bath & Sanitary Silicone - White 295ml (Box of 25) 
FloPlast Half Round Stop End Outlet, Black – 112mm Flashing Tape
Best Sellers
-
Marley Vapour Permeable Underlay 1m x 50m
£109.99 Incl VAT £91.66 Excl VAT Read more -
Klober Double Roman Roof Tile Vent – Brown KG9857-3-0247 (Box of 10)
£215.99 Incl VAT £179.99 Excl VAT Add to basket -
Everbuild Black Jack 903 Bitumen Trowel Mastic – 2.5 Litre
£22.83 Incl VAT £19.03 Excl VAT Add to basket -
Evo-Stik Tile & Grout Adhesives – White 3kg
£7.99 Incl VAT £6.66 Excl VAT Add to basket -
OX Pro 16oz Claw Hammer + 10in Claw Bar – (Twin pack)
£29.99 Incl VAT £24.99 Excl VAT Read more -
ALM Code 8 Milled Lead – 600mm x 3m
£203.90 Incl VAT £169.92 Excl VAT Add to basket
Flashing Tape
Roofing flashing tape, also known as flashband or lead flashing tape, is one of many ways to protect, repair, and watertight seal something permanently. Due to its heat resistance and ability to provide an immediate watertight seal on an enormous variety of surfaces, it is an essential part of any roofing project. In addition, it comes in multiple sizes to suit your roof needs.
Among our range, we have the excellent Cromar Flashing Tape, Bostik Flashing Tape and Everbuild’s flashing trade tape.
How To Apply Flashing Tape the Correct Way
To help out, here is a short guide on how to apply flashing tape.
Cut the Flashing Strip to the length required. To avoid any creasing, remove approximately 50mm of backing paper and carefully position the sealing strip. Hold the backing paper firmly and release it steadily from the sealing strip as the product is applied.
Smooth into position using hand pressure. Use a seam roller or rounded wood smooth to ensure good contact and expel any air, especially on overlaps and at the edges. When laying adjacent rolls, Flashing Strip should be overlapped by a minimum of 25mm for a watertight seal.
The seam must be pressed firmly with a hand roller paying particular attention at the point of overlap. Remember, if applying this in cold weather (5-15 Celsius), storing the flashing tape in a warm place is highly recommended before use. If possible, it is also suggested to warm up the surface slightly.
