Code 6 Cast Lead - 210mm x 6m 
FloPlast Half Round Downpipe 112° Bend, Brown 
FloPlast Black Half Round Adjustable Angle - 50° to 156° 
Cromar Vent 3 Light Breathable Membrane – 1.5m x 50m 
Bond It D4 Professional Wood Adhesive - Clear 1L 
Bostik Flexacryl Instant Repair Waterproofing - Grey 5kg 
Bond It 5 Minute PU Wood Gel - Translucent 300ml 
Everbuild Professional Sealant Gun – C4 (290 - 380ml) 
OX Pro Heavy Duty Aviation Snips Right Cut (Green) 
Hambleside Danelaw TV15/4 Tile Vent - Antique Red (Box of 5) 
OX Trade Torpedo Level 230mm / 9in 
Code 4 Cast Lead - 914mm x 6m 
IKO Super Shed Felt - Black 8m Roll 
Everbuild Pinkgrip SF But It’s White – 380ml 
Timco 8 Spanner Set 
Klober Thin Line Vent - Black KG9855-3-0450 (Box of 10) 
201 Mortar Admix – 5 Litre 
Ronseal Diamond Hard Doorstep Paint - Black Satin 250ml 
Bond It Rain-Mate All Weather Sealant - White EU3 
Ronseal 6 Year Anti Mould Paint - White Silk 2.5L 
ALM Code 5 Milled Lead - 450mm x 6m 
Klober Double Roman Roof Tile Vent - Antique Red KG9857-3-0116 (Box of 10) 
Everbuild Caulk Once – White 380ml (Box of 12) 
OX Tools Plasterers Bucket, Blue – 25 Litre 
Cromar Black Bitumen Paint - 5 Litre 
Everbuild Plumbers PVC Pipe Cement - Clear 250ml 
Left Hand Klober Contract Dry Verge Unit Brown 
ALM Lead Expansion Joint - Code 5 - 400mm x 3m 
FrogTape® Delicate Surface Masking Tape - Yellow 36mm x 41.1m 
ALM Code 7 Milled Lead - 390mm x 6m 
Everbuild P13 Plumbers Putty - Beige 750g 
Code 7 Cast Lead - 150mm x 3m 
Timco Premium Dry Diamond Core Drill Kit 5pcs 
Klober Profile-Line Twin Plain Tile Vent - Brown KG9861-0247 (Box of 10) 
OX Pro Moulding Bar - 10" / 250mm 
FloPlast FloGuard Gutter Guard - 5m (10 x 500mm) 
Freeflow 65mm Square Gutter Drain Pipe 112° Branch - Black 
FloPlast Round Line Downpipe Clip, White 
Bond It Aluminium Solar Reflective Paint - Silver 2.5L 
Timco Lifting Sling 2000kg / 2 Tonnes 
Soudaseal Mirror Light Grey, 290ml 
Bond It Monster Water Resistant Tape - 48mm x 11m (Black) 
ALM Code 8 Milled Lead - 914mm x 3m 
Hedgehog Gutter Brush Leaf Guard Black – 4m x 150mm Flashing Tape
Best Sellers
-
SikaFlex EBT+ Polyurethane Adhesive & Sealant – 300ml
From: £9.98 Incl VAT £8.32 Excl VAT Select options This product has multiple variants. The options may be chosen on the product page -
ALM Code 4 Milled Lead – 1600mm x 3m
£277.54 Incl VAT £231.28 Excl VAT Add to basket -
Bond It B2 Expanding PU Foam – Beige 750ml
£8.99 Incl VAT £7.49 Excl VAT Add to basket -
Timloc 1206 Underfloor Vent Horizontal Rear Extension + 100mm
£6.99 Incl VAT £5.83 Excl VAT Add to basket -
Everbuild Jetcem Deep Rapid Repair Sand & Cement – 2kg
£6.99 Incl VAT £5.83 Excl VAT Add to basket -
FloPlast Square Line Gutter Angle 135° White
£6.29 Incl VAT £5.24 Excl VAT Add to basket
Flashing Tape
Roofing flashing tape, also known as flashband or lead flashing tape, is one of many ways to protect, repair, and watertight seal something permanently. Due to its heat resistance and ability to provide an immediate watertight seal on an enormous variety of surfaces, it is an essential part of any roofing project. In addition, it comes in multiple sizes to suit your roof needs.
Among our range, we have the excellent Cromar Flashing Tape, Bostik Flashing Tape and Everbuild’s flashing trade tape.
How To Apply Flashing Tape the Correct Way
To help out, here is a short guide on how to apply flashing tape.
Cut the Flashing Strip to the length required. To avoid any creasing, remove approximately 50mm of backing paper and carefully position the sealing strip. Hold the backing paper firmly and release it steadily from the sealing strip as the product is applied.
Smooth into position using hand pressure. Use a seam roller or rounded wood smooth to ensure good contact and expel any air, especially on overlaps and at the edges. When laying adjacent rolls, Flashing Strip should be overlapped by a minimum of 25mm for a watertight seal.
The seam must be pressed firmly with a hand roller paying particular attention at the point of overlap. Remember, if applying this in cold weather (5-15 Celsius), storing the flashing tape in a warm place is highly recommended before use. If possible, it is also suggested to warm up the surface slightly.
