OX Pro Impact Drill & Drive Accessory Set - 40 Piece 
Soudal Construction Silicone, Grey - 290ml (Box of 12) 
Code 5 Cast Lead - 1600mm x 6m 
OX Pro Super Open Mouth Tool Bag 
ALM Code 6 Milled Lead Flashing - 914mm x 6m 
Bond It Economy Sealant Gun - Blue 400ml (EU3 + EU4) 
Bond It Patination Oil 500ml 
Soudal B2 Fire Rated Expanding Foam Gun Grade - 750ml 
Everbuild Plumbers PVC Pipe Cement - Clear 250ml 
Resiblock Indian Sandstone Sealer Invisible - 5 Litre 
ALM Code 4 Milled Lead - 240mm x 3m 
Soudal Genius Gun Plasterboard Adhesive - 750ml (Box of 12) 
Timco Mixed Carriage Bolts, Nuts and Washers Grab Pack 
Soudal Trade PU Construction Adhesive - Beige 290ml 
10 x Timloc 3014C Over Fascia Ventilation System 1M - Black 
ALM Code 8 Milled Lead - 150mm x 6m 
Everbuild Black Jack 904 Roof Felt Adhesive – 1 Litre 
FloPlast Square Line Downpipe Clip White 
Everbuild Stick2 Rapid Epoxy Tube (2 x 12ml) 
Code 7 Cast Lead - 390mm x 6m 
Bond It Trowel Mastic - Black 5L 
Bond It Expanding Foam Cleaning Fluid - Clear 500ml 
Ronseal Crystal Clear Outdoor Varnish - Matt 750ml 
Hambleside Danelaw Double Pantile Vent TV15/2 - Brown (Box of 5) 
Klober Thin Line Vent - Slate Grey KG9855-3-0429 (Box of 10) 
OX Trade Hard Green Carpenters Pencils – Pack of 10 Flashing Tape
Best Sellers
-
Klober 15×9 Tile Vent – KG9690 (Various Colours)
From: £30.77 Incl VAT £25.64 Excl VAT Select options This product has multiple variants. The options may be chosen on the product page -
OX Pro Semi Round Dutch Pin, Swivel Arm – 4 Pack
£34.99 Incl VAT £29.16 Excl VAT Add to basket -
OX Tools Pro Pointed Flooring Trowel
From: £23.99 Incl VAT £19.99 Excl VAT Select options This product has multiple variants. The options may be chosen on the product page -
Ronseal Precision Finish Brush – 5 Pack
£14.99 Incl VAT £12.49 Excl VAT Add to basket -
Code 3 Cast Lead – 1200mm x 6m
£308.45 Incl VAT £257.04 Excl VAT Add to basket -
Bond It Anchor Bond – Resin Mortar Anchor System – Grey
From: £9.99 Incl VAT £8.33 Excl VAT Select options This product has multiple variants. The options may be chosen on the product page
Flashing Tape
Roofing flashing tape, also known as flashband or lead flashing tape, is one of many ways to protect, repair, and watertight seal something permanently. Due to its heat resistance and ability to provide an immediate watertight seal on an enormous variety of surfaces, it is an essential part of any roofing project. In addition, it comes in multiple sizes to suit your roof needs.
Among our range, we have the excellent Cromar Flashing Tape, Bostik Flashing Tape and Everbuild’s flashing trade tape.
How To Apply Flashing Tape the Correct Way
To help out, here is a short guide on how to apply flashing tape.
Cut the Flashing Strip to the length required. To avoid any creasing, remove approximately 50mm of backing paper and carefully position the sealing strip. Hold the backing paper firmly and release it steadily from the sealing strip as the product is applied.
Smooth into position using hand pressure. Use a seam roller or rounded wood smooth to ensure good contact and expel any air, especially on overlaps and at the edges. When laying adjacent rolls, Flashing Strip should be overlapped by a minimum of 25mm for a watertight seal.
The seam must be pressed firmly with a hand roller paying particular attention at the point of overlap. Remember, if applying this in cold weather (5-15 Celsius), storing the flashing tape in a warm place is highly recommended before use. If possible, it is also suggested to warm up the surface slightly.
