OX Pro Aluminium Metric Rafters Square - 300mm 
Bond It No Crack Caulk - White 310ml 
Everflex Premium+ 450 Builders Silicone – Grey 300ml (Box of 25) 
Everbuild Forever Ivory Silicone Sealant – 295ml (Box of 12) 
Soudal Grip All Solvent-Based - 290ml 
FloPlast Square Line Downpipe Offset Bend 92.5° White – 65mm 
Bond It All Weather Roofing Compound - Black 2.5L 
Ronseal Super Flexible Smooth Finish Filler - 300ml 
ALM Code 4 Milled Lead - 1600mm x 6m 
Bond It Patination Oil 1L 
Code 8 Cast Lead - 360mm x 6m 
Samac Half Round Snowguard Bracket - 225mm (9") 
Code 5 Cast Lead - 850mm x 6m 
ALM Code 6 Milled Lead Flashing - 450mm x 3m 
Timco Mixed Cable Clips 
Armatool Lead Dresser Set - 5 Piece Set 
Everbuild P13 Plumbers Putty - Beige 750g 
Permavent Black Breather Membrane – 1m x 20m 
Ronseal One Coat Water-Based Tile Paint - Ivory Satin 750ml 
Code 6 Cast Lead - 1200mm x 3m 
Everbuild Everflex Mirror Mate Adhesive - White 290ml 
Ronseal Trade 10Yr Woodstain Satin Walnut 750ml Brown 
Ronseal uPVC Cleaner - 750ml Flashing Tape
Best Sellers
-
Standard Brush 2-Inch
£1.79 Incl VAT £1.49 Excl VAT Add to basket -
Soudal Fix ALL High Tack Hybrid Sealant – 290ml
From: £6.99 Incl VAT £5.83 Excl VAT Select options This product has multiple variants. The options may be chosen on the product page -
Hambleside Danelaw CON6+ Dry Ridge 6m Kit
£54.99 Incl VAT £45.83 Excl VAT Add to basket -
ALM Code 5 Milled Lead – 300mm x 3m
£65.14 Incl VAT £54.28 Excl VAT Add to basket -
Timloc 3-in-1 Eaves Vent Pack – 6m
£28.99 Incl VAT £24.16 Excl VAT Add to basket -
Evo-Stik Roof & Gutter Sealant – Black 290ml
£3.49 Incl VAT £2.91 Excl VAT Read more
Flashing Tape
Roofing flashing tape, also known as flashband or lead flashing tape, is one of many ways to protect, repair, and watertight seal something permanently. Due to its heat resistance and ability to provide an immediate watertight seal on an enormous variety of surfaces, it is an essential part of any roofing project. In addition, it comes in multiple sizes to suit your roof needs.
Among our range, we have the excellent Cromar Flashing Tape, Bostik Flashing Tape and Everbuild’s flashing trade tape.
How To Apply Flashing Tape the Correct Way
To help out, here is a short guide on how to apply flashing tape.
Cut the Flashing Strip to the length required. To avoid any creasing, remove approximately 50mm of backing paper and carefully position the sealing strip. Hold the backing paper firmly and release it steadily from the sealing strip as the product is applied.
Smooth into position using hand pressure. Use a seam roller or rounded wood smooth to ensure good contact and expel any air, especially on overlaps and at the edges. When laying adjacent rolls, Flashing Strip should be overlapped by a minimum of 25mm for a watertight seal.
The seam must be pressed firmly with a hand roller paying particular attention at the point of overlap. Remember, if applying this in cold weather (5-15 Celsius), storing the flashing tape in a warm place is highly recommended before use. If possible, it is also suggested to warm up the surface slightly.
