Ronseal One Coat All Surface Primer and Undercoat - White 250ml 
Code 8 Cast Lead - 600mm x 6m 
Ulti-Mate Sandtoft Rivius Charcoal Roof Vent Tile 
Code 4 Cast Lead - 240mm x 6m 
OX Tools Pro Carpenters Square & Angle Finder 300mm / 12in 
Soudal Trade Sanitary Silicone - Clear 290ml 
Ronseal 5 Minute Multi-Purpose Smooth Finish Filler - 290ml 
Ronseal Crystal Clear Outdoor Varnish - Matt 2.5L 
Sika Water Seal & Waterproof Protector - 5 Litre 
Samac Aluminium Clout - 1kg (40mm x 2.65mm) 
OX Pro Aluminium Hawk - 13 inch x 13 inch 
Code 7 Cast Lead - 800mm x 6m 
Bond It Mould Stop - Clear 1L 
Soudal Decorators Caulk – White 290ml (Box of 24) 
Everbuild 404 Fungicidal Wash – 1 Litre 
Bond It Cover-It Hardfloor & Glass Protector - Blue 625mm X 50M 
Soudal Genius Gun Building Adhesive 750ml - Champagne 
Ronseal uPVC Paint - Royal Blue Satin 750ml 
Soudal Water Stop Roof Repair Compound – Grey 4kg 
Soudal Soudaduct - Grey 300ml 
Armatool Leather Belt Black, Large 
OX Pro Impact Bit Set - 11 Piece 
OX Heavy Duty Soft Gel Filled Knee Pad 
Easy-Trim Lead R Flashing Smooth – 150mm x 5m Flashing Tape
Best Sellers
-
Code 3 Cast Lead – 390mm x 3m
£51.41 Incl VAT £42.84 Excl VAT Add to basket -
Hambleside Danelaw TV15/4 Tile Vent – Brown (Box of 5)
£114.99 Incl VAT £95.83 Excl VAT Add to basket -
Everbuild Stick2 Industrial Superglue GP – Transparent 20g
£4.99 Incl VAT £4.16 Excl VAT Add to basket -
OX Pro Moulding Bar – 10″ / 250mm
£16.99 Incl VAT £14.16 Excl VAT Add to basket -
ALM Code 6 Milled Lead Flashing – 800mm x 6m
£407.81 Incl VAT £339.84 Excl VAT Add to basket -
ALM Code 7 Milled Lead – 180mm x 6m
£110.45 Incl VAT £92.04 Excl VAT Add to basket
Flashing Tape
Roofing flashing tape, also known as flashband or lead flashing tape, is one of many ways to protect, repair, and watertight seal something permanently. Due to its heat resistance and ability to provide an immediate watertight seal on an enormous variety of surfaces, it is an essential part of any roofing project. In addition, it comes in multiple sizes to suit your roof needs.Â
Among our range, we have the excellent Cromar Flashing Tape, Bostik Flashing Tape and Everbuild’s flashing trade tape.
How To Apply Flashing Tape the Correct Way
To help out, here is a short guide on how to apply flashing tape.
Cut the Flashing Strip to the length required. To avoid any creasing, remove approximately 50mm of backing paper and carefully position the sealing strip. Hold the backing paper firmly and release it steadily from the sealing strip as the product is applied.
Smooth into position using hand pressure. Use a seam roller or rounded wood smooth to ensure good contact and expel any air, especially on overlaps and at the edges. When laying adjacent rolls, Flashing Strip should be overlapped by a minimum of 25mm for a watertight seal.Â
The seam must be pressed firmly with a hand roller paying particular attention at the point of overlap. Remember, if applying this in cold weather (5-15 Celsius), storing the flashing tape in a warm place is highly recommended before use. If possible, it is also suggested to warm up the surface slightly.
