Ronseal Stays White 2in1 Paint & Primer - Matt 2.5L 
OX Pro Aluminium Hawk - 13 inch x 13 inch 
FloPlast Half Round Stop End Outlet, Brown – 112mm 
Bond It B3 Fill And Fix Expanding Foam Aerosol - Beige 750ml 
IKO 5U Eaves Protection Strips - 16m x 330mm 
Everbuild Everflex AquaMate Aquarium Sealant – Translucent 295ml 
Cromar Vent 3 Classic Breathable Membrane - 1m x 25m 
Code 3 Cast Lead - 450mm x 6m 
Bond It Cyanoacrylate Superglue Medium Viscosity, Clear - 50g 
Freeflow 65mm Square Down Pipe Connector - Black 
Soudal Vaseline Lubricating & Protective Spray – 400ml 
Leadax Lead Free Flashing Alternative 600mm (6M Rolls) 
ALM Code 4 Milled Lead - 390mm x 6m 
Armatool Stripping Spade 
Everbuild Caulk Once – White 295ml 
Ronseal Stays White 2in1 Paint & Primer - Gloss 750ml 
ALM Code 6 Milled Lead Flashing - 1200mm x 3m 
ALM Code 5 Milled Lead - 1600mm x 3m 
Timloc 1206 Underfloor Vent Horizontal Rear Extension + 100mm 
Timco M6 Zip-Fix Cavity Wall Fixing - 50 Pieces 
Code 4 Cast Lead - 510mm x 6m 
Everbuild Febond PVA - 2.5L 
Soudal Repair Express Plaster - White 900ml Flashing Tape
Best Sellers
-
Climateq POP 135 Breather Membrane 1m x 50m
£43.99 Incl VAT £36.66 Excl VAT Read more -
Code 5 Cast Lead – 1600mm x 6m
£696.86 Incl VAT £580.72 Excl VAT Add to basket -
Code 6 Cast Lead – 390mm x 3m
£99.96 Incl VAT £83.30 Excl VAT Add to basket -
Code 7 Cast Lead – 450mm x 3m
£137.09 Incl VAT £114.24 Excl VAT Add to basket -
ALM Code 8 Milled Lead – 150mm x 6m
£101.95 Incl VAT £84.96 Excl VAT Add to basket -
Ronseal 10 Year Weatherproof Wood Paint (2 in 1 Formula) – Gloss 2.5L
From: £26.99 Incl VAT £22.49 Excl VAT Select options This product has multiple variants. The options may be chosen on the product page
Flashing Tape
Roofing flashing tape, also known as flashband or lead flashing tape, is one of many ways to protect, repair, and watertight seal something permanently. Due to its heat resistance and ability to provide an immediate watertight seal on an enormous variety of surfaces, it is an essential part of any roofing project. In addition, it comes in multiple sizes to suit your roof needs.Â
Among our range, we have the excellent Cromar Flashing Tape, Bostik Flashing Tape and Everbuild’s flashing trade tape.
How To Apply Flashing Tape the Correct Way
To help out, here is a short guide on how to apply flashing tape.
Cut the Flashing Strip to the length required. To avoid any creasing, remove approximately 50mm of backing paper and carefully position the sealing strip. Hold the backing paper firmly and release it steadily from the sealing strip as the product is applied.
Smooth into position using hand pressure. Use a seam roller or rounded wood smooth to ensure good contact and expel any air, especially on overlaps and at the edges. When laying adjacent rolls, Flashing Strip should be overlapped by a minimum of 25mm for a watertight seal.Â
The seam must be pressed firmly with a hand roller paying particular attention at the point of overlap. Remember, if applying this in cold weather (5-15 Celsius), storing the flashing tape in a warm place is highly recommended before use. If possible, it is also suggested to warm up the surface slightly.
