Code 7 Cast Lead - 1200mm x 6m 
Everbuild Everflex Pyro Mate Fire Rated Silicone – White 295ml 
Timloc Over Fascia Vent - 1m 
Ronseal Multi Purpose Smooth Finish Filler - 1.2kg + 50% Free 
Ronseal Stays White One Coat Non-Drip Paint - Gloss 2.5L 
Everbuild Everflex Premium+ 565 Clean Room Silicone – White 295ml (Box of 25) 
Stanley Dynagrip Chisel Knife - 25mm 
Everbuild 209 Liquid Mortar Tone - Black 5 Litre 
Everbuild Plumbers Gold Sealant – Clear 290ml (Box of 12) 
Ronseal Exterior Yacht Varnish - Satin 1L 
Code 3 Cast Lead - 300mm x 6m 
Everbuild Anchorset Green 150 - Grey 150ml 
Bond It Caulk-Mate One Hour Decorators Caulk - White EU3 
OX Pro Tuff Rule - Cyan 
Easy-Trim Lead R Flashing Smooth – 450mm x 5m 
BORA Centipede 2ft x 4ft x 30in Unit - 4 X-Cups + 2 Clamp + C/S Bag 
ALM Code 4 Milled Lead - 510mm x 3m 
Code 8 Cast Lead - 850mm x 6m 
Ronseal Wet Rot Wood Hardener - 250ml 
Soudal Superglue Activator - 200ml (Box of 12) 
Hambleside Danelaw TV15/4 Tile Vent - Terracotta (Box of 5) 
Evo-Stik Gripfill Extra Multi-Purpose - Buff 350ml 
Timloc Inline Slate Vent Black (Box of 5) 
Bond It D4 Professional Wood Adhesive - Clear 1L (Box of 12) 
IKO Super Shed Felt - Green 8m Roll Flashing Tape
Best Sellers
-
Axiome 4mm Twinwall Polycarbonate Sheet, Clear
From: £16.19 Incl VAT £13.49 Excl VAT Select options This product has multiple variants. The options may be chosen on the product page -
OX Pro Rodless Sealant Gun – Up to 400ml
£34.99 Incl VAT £29.16 Excl VAT Add to basket -
ALM Code 8 Milled Lead – 800mm x 3m
£274.70 Incl VAT £228.92 Excl VAT Add to basket -
Ronseal Ultimate Finish Decking Pad Kit
£17.99 Incl VAT £14.99 Excl VAT Add to basket -
Samac Aluminium Clout Nails – 60mm x 3.35mm
From: £15.70 Incl VAT £13.08 Excl VAT Select options This product has multiple variants. The options may be chosen on the product page -
OB41 White Grease Spray – 400ml
£11.99 Incl VAT £9.99 Excl VAT Add to basket
Flashing Tape
Roofing flashing tape, also known as flashband or lead flashing tape, is one of many ways to protect, repair, and watertight seal something permanently. Due to its heat resistance and ability to provide an immediate watertight seal on an enormous variety of surfaces, it is an essential part of any roofing project. In addition, it comes in multiple sizes to suit your roof needs.Â
Among our range, we have the excellent Cromar Flashing Tape, Bostik Flashing Tape and Everbuild’s flashing trade tape.
How To Apply Flashing Tape the Correct Way
To help out, here is a short guide on how to apply flashing tape.
Cut the Flashing Strip to the length required. To avoid any creasing, remove approximately 50mm of backing paper and carefully position the sealing strip. Hold the backing paper firmly and release it steadily from the sealing strip as the product is applied.
Smooth into position using hand pressure. Use a seam roller or rounded wood smooth to ensure good contact and expel any air, especially on overlaps and at the edges. When laying adjacent rolls, Flashing Strip should be overlapped by a minimum of 25mm for a watertight seal.Â
The seam must be pressed firmly with a hand roller paying particular attention at the point of overlap. Remember, if applying this in cold weather (5-15 Celsius), storing the flashing tape in a warm place is highly recommended before use. If possible, it is also suggested to warm up the surface slightly.
