Samac Silicone Bronze Nails - 1kg (31mm x 1.8mm) 
Timloc 3-in-1 Eaves Vent Pack - 6m 
Bond It Monster Water Resistant Tape - 48mm x 11m (Black) 
Everbuild Griptite Construction Adhesive - 350ml 
Code 6 Cast Lead - 240mm x 6m 
ALM Code 8 Milled Lead - 150mm x 6m 
Felt Support Tray – 1.5m 
Ronseal Ultra Tough Hardglaze Clear Varnish - 250ml 
Bond It De-Bond Mate Silicone Sealant Remover Gel - 125ml Amber/Brown 
Everbuild All Purpose Ready Mixed Filler - 1kg 
Bostik Fast-Tak Permanent Adhesive - 500ml 
Soudal Repair Express Plaster - White 250ml 
Everbuild Wood Adhesive 502 – 500ml 
ALM Code 7 Milled Lead - 800mm x 6m 
Timco Pipe Shears 
ALM Code 5 Milled Lead - 914mm x 3m 
Universal Hip Support System Tray - 1.2m 
Everbuild Caulk Once – White 380ml 
Soudal B2 Fire Rated Expanding Foam Gun Grade - 750ml (Box of 12) 
Code 5 Cast Lead - 1200mm x 6m 
Timco Pozi C2 Strong-Fix Twin Cut Screws - 4.0mm x 40mm (Box of 200) 
Hambleside Danelaw TV15/1 Flush Fitting Tile Vent - Brown (Box of 5) 
FloPlast Downpipe Rainwater Diverter Kit RVS1 
Everbuild Constructa-Pro Adhesive Foam - Grey 750ml 
Code 7 Cast Lead - 180mm x 6m 
Timloc Double Roman Tile Vent Red (Box of 6) 
Ronseal Precision Finish Brush - 5 Pack 
Code 4 Cast Lead - 850mm x 6m 
Hambleside Danelaw CON6+ Dry Ridge 6m Kit 
OX Trade 4 Piece Spirit Level Set - 230, 600, 1200 & 1800mm Flashing Tape
Best Sellers
-
Klober Thin Line Vent – Black KG9855-3-0450 (Box of 10)
£215.99 Incl VAT £179.99 Excl VAT Add to basket -
Everbuild General Purpose Silicone – Clear 280ml (Box of 12)
£42.84 Incl VAT £35.70 Excl VAT Add to basket -
Code 3 Cast Lead – 600mm x 3m
£77.11 Incl VAT £64.26 Excl VAT Add to basket -
Everbuild 701 Non-Slip Tile Adhesive – White 3.75kg
£4.79 Incl VAT £3.99 Excl VAT Add to basket -
ALM Code 6 Milled Lead Flashing – 600mm x 6m
£305.86 Incl VAT £254.88 Excl VAT Add to basket -
Timco Firmahold Hammer Tacker
£34.99 Incl VAT £29.16 Excl VAT Add to basket
Flashing Tape
Roofing flashing tape, also known as flashband or lead flashing tape, is one of many ways to protect, repair, and watertight seal something permanently. Due to its heat resistance and ability to provide an immediate watertight seal on an enormous variety of surfaces, it is an essential part of any roofing project. In addition, it comes in multiple sizes to suit your roof needs.Â
Among our range, we have the excellent Cromar Flashing Tape, Bostik Flashing Tape and Everbuild’s flashing trade tape.
How To Apply Flashing Tape the Correct Way
To help out, here is a short guide on how to apply flashing tape.
Cut the Flashing Strip to the length required. To avoid any creasing, remove approximately 50mm of backing paper and carefully position the sealing strip. Hold the backing paper firmly and release it steadily from the sealing strip as the product is applied.
Smooth into position using hand pressure. Use a seam roller or rounded wood smooth to ensure good contact and expel any air, especially on overlaps and at the edges. When laying adjacent rolls, Flashing Strip should be overlapped by a minimum of 25mm for a watertight seal.Â
The seam must be pressed firmly with a hand roller paying particular attention at the point of overlap. Remember, if applying this in cold weather (5-15 Celsius), storing the flashing tape in a warm place is highly recommended before use. If possible, it is also suggested to warm up the surface slightly.
