Hambleside Danelaw Single Pantile Roof Tile Vent, TV10/8 - Black (Box of 5) 
Everbuild Resiblock Trade – Clear 5 Litre 
ALM Code 5 Milled Lead - 600mm x 6m 
Code 8 Cast Lead - 914mm x 3m 
Bond It Drive Alive Tarmac Restorer - 4 Litres 
OB41 Foaming Glass Cleaner - 400ml 
ALM Code 8 Milled Lead - 510mm x 6m 
Everbuild ASBO Graffiti Remover - 400ml 
Spax T-Star Plus Washer-Head Wirox Coated Screws - 6.0 x 200mm (Box of 16) 
Freeflow 112mm Round Gutter System 90° Gutter Angle - White 
Ronseal 5 Minute Multi-Purpose Smooth Finish Filler - 290ml 
Code 5 Cast Lead - 510mm x 3m 
SikaBond MS Wood Floor Gun Grade - Parquet Brown 600ml 
Everbuild Glass Protector - Red (600mm x 25m) 
Klober 15x9 Tile Vent - Slate Grey KG9690-0429 (Box of 10) 
Everbuild Anchorset Green 300 - Grey 300ml (Box of 12) 
Chesterfelt Shed Roofing Felt - Green Standard 10m 
ALM Code 7 Milled Lead - 180mm x 3m 
Easy-Trim Universal Dry Verge System Black (Box of 50) 
ALM Code 4 Milled Lead - 240mm x 3m 
FloPlast Half Round Downpipe Branch 67.5°, White 
Timco Cloth Tape White - 50m x 48mm 
Soudal Grip ALL Solvent-Free - White 290ml (Box of 12) 
Ronseal Stays White 2in1 Paint & Primer - Gloss 2.5L 
Gorilla Contact Adhesive Tube - Clear 75g 
Gorilla Glue - Dark Brown 1L 
Everbuild PVCu Acti-Spray – Clear 200ml (Box of 12) 
Everbuild Smart Tack Handy – 500ml 
Uses
The GP200 by Bond It is a versatile, multi-purpose sealant that has fantastic adhesion to various substrates found within a home. It's formulated with a fungicide, delivering an enhanced resistance to mould alongside defence against high-humid conditions. Therefore, this makes the product fantastic in kitchens, bathrooms, utility rooms and around showers, baths and tiles.
Preparation
It's vital to prepare the surfaces before attempting to seal them. Otherwise, you risk the adhesion failing to achieve optimal performance. To clean the area, you must remove and clean away any dirt, dust, grease, oil, etc. The surface should then be dried after cleaning; if not, you do risk failing performance.
Applications
- Cut the top of the cartridge, taking care not to damage the threaded screw.
- Cut the nozzle at a 45° angle with an opening slightly larger than the gap to be filled and screw it onto the cartridge.
- Place the cartridge into a suitable sealant applicator tool.
- Point the tip of the nozzle to the gap and extrude the material, trying to keep one continuous even bead along the gap.
- After applying the sealant, you should tool it down before the skin starts to form; this should be done within 5-10 minutes of applying.
Limitadations
- Surfaces which water can penetrate will affect this product's performance
- This product is not suitable for fixing mirrors or sealing natural marble
- Do not apply this product to bitumen or asphalt
- White and Transparent variations may start discolouration when in direct, long exposure to sunlight
