Ronseal Stays White One Coat Non-Drip Paint - Satin 2.5L 
Code 5 Cast Lead - 914mm x 3m 
SikaFlex EBT+ Polyurethane Adhesive & Sealant, Beige - 300ml (Box of 12) 
Bond It Cover-It Hardfloor & Glass Protector - Blue 625mm X 25M 
Code 6 Cast Lead - 600mm x 6m 
ALM Code 3 Milled Lead - 760mm x 3m 
Soudal Trade All Weather Sealant - Clear 290ml 
Soudal Soudafoam Hand Held One Shot - 150ml (Box of 12) 
ALM Code 6 Milled Lead Flashing - 210mm x 3m 
Soudal Roof & Gutter Sealant – Black 290ml 
Soudafoam Gap Filler Gun Grade – 750ml 
Ronseal Multi Purpose Filler Smooth Finish Powder - 2Kg 
Everbuild Lumberjack 550 Floor Adhesive – Buff 300ml 
Code 4 Cast Lead - 210mm x 3m 
Everbuild Stixall Extreme Power - Grey 290ml (Box of 12) 
Everbuild Opti-Mix Mortar Plasticiser – 1 Litre 
Timco M6 Zip-Fix Cavity Wall Fixings - 10 Pieces 
Bond It Mirror Pro Adhesive - White EU3 
Everbuild Anchorset Green 300 - Grey 300ml 
ALM Code 7 Milled Lead - 210mm x 6m 
ALM Code 8 Milled Lead - 914mm x 3m 
Bond It Frame-Mate Door & Window Sealant - White EU3 
Code 3 Cast Lead - 450mm x 3m 
FloPlast Square Line Pipe Connector Black 
Siroflex SX Contractors LMN Silicone OAK 300ml 
ALM Code 5 Milled Lead - 450mm x 3m 
Easy-Trim Universal Dry Verge System - Grey (Box of 50) 
Bond It D4 Professional Wood Adhesive - Clear 1L 
Everbuild External Frame Sealant - Grey 290ml (Box of 12) 
FloPlast Side Fix Rafter Bracket 
OX Pro 7 Piece Screwdriver Set 
SEAL PRO, Low Modulus Hybrid Universal Sanitary Sealant & Adhesive Bond, White - EU3 
This WP70 Neutral Oxime Silicone is a high-quality, neutral cure silicone for perimeter sealing external wood and PVCu windows and door frames. It has a rapid curing composite which has excellent adhesion properties to most common building materials such as; glass, aluminium and painted surfaces.
There are some limitations to this product if the intended application surface is porous, you must prime the surface prior. If the surface is so porous that water can seep into the bond, be sure to carry out remedial work. This product will not work on natural stone nor in aquaria settings; asphalt and bitumen are also not advised, and painting over the sealant is not recommended. If your intended location is a low UV light area, the bond will be at risk of yellowing.
Application
Before you begin the application, ensure that you clean the surfaces prior. Remove all contaminants that can hinder adhesion, this includes dust, grease, oil and more. After you've cleaned the surface, make sure it is dry. If the intended application on movement joints, a backing material is suggested, Bond It Expanding Foam range is suitable, or a backing tape or rod. If the surface is porous, as mentioned above, be sure to prime it to optimise the adhesion.
- Use a standard applicator tool that can take EU3 cartridge (380ml)
- Cut the nozzle at a 45° angle with a size slightly larger than the intended gap
- After application, tool down using a sealant applicator tool
- Protect the sealant for 3 hours due to it possible cracking with movement
