Klober Profile-Line Flat Tile Vent - Brown KG9856-3-0247 (Box of 10) 
Felt Support Tray – 1.5m 
Everbuild Dual Purpose Foam Cleaner – 500ml 
Premium Flashpoint Lead Sealant - Sand 
ALM Code 6 Milled Lead Flashing - 390mm x 6m 
Bond It PVA & Adhesive Sealer - White 500ml 
Everbuild Power Pro Sealant Gun - 290 to 380ml (Box of 12) 
Timloc Plain Tile Vent Red (Box of 14) 
Youngman Spacemaker Loft Ladder (30234000) 
Code 3 Cast Lead - 360mm x 3m 
Everbuild General Purpose Silicone - Black 290ml (Box of 12) 
Timco Mixed Cable Clips 
Ronseal One Coat Stays White Radiator Paint - Satin 750ml 
Armatool Leather Belt Black, Large 
ALM Code 8 Milled Lead - 210mm x 6m 
DeWalt FLEXTORQ Set PZ2 + Drive Guide in Small Bulk Storage Case 
Everbuild KOS Black Fire Cement - 500g 
Code 7 Cast Lead - 600mm x 6m 
Klober Double Pantile Vent - Antique Red KG9858-3-0116 (Box of 10) 
DeWalt 18V XR Compact Jobsite Blower Bare Unit - (DCV100-XJ) 
Everbuild 204 Evermix 3 in 1 - 5 Litre 
Code 5 Cast Lead - 360mm x 3m 
Bond It Gripbond Pro Max Adhesive - White EU3 
Everbuild 408 Super Seal - 5 Litre 
Everbuild Black Jack 901 Black Bitumen Paint – 5 Litre 
Uses
The Bond It Bitumen Primer is an excellent primer that provides a key for subsequent bituminous coatings. It is ideal for those dealing with challenging substrates that won't naturally accept bituminous products. All you need to do is apply this primer before, allow it to dry, and then proceed with your application, repairing, sealing, treating, and generally improving the surface. This product's versatility is unmatched, providing keys to challenging substrates such as;
- Bitumen felt
- Mastic asphalt
- Weathered corrugated iron and steel
- Fibre cement
Preparation
To achieve optimal adhesive results with the bitumen primer, clean the surface and remove contaminants, including dirt, dust, grease, oil, organic growth, loose debris, etc. If the surface is suffering from a lot of organic growth, use a fungicide to eradicate it, and any rusting surface should be treated with a rust inhibitor.
Application
- Apply via brush or pile roller
- Apply a thin coat of bitumen primer, taking care not to cause any pooling
- Any area to be waterproofed should have the coat applied at least 75mm wide around it for secure sealing
- Leave to dry fully for at least 2 - 3 hours
