ALM Code 5 Milled Lead - 210mm x 6m 
Bond It B3 Fill And Fix Expanding Foam Aerosol - Beige 500ml 
Siroflex Painters Caulk-It - 380ml 
Code 3 Cast Lead - 150mm x 3m 
Code 7 Cast Lead - 760mm x 3m 
Bond It Aluminium Foil Tape - 50mm x 45M (Box of 24) 
Bond It FG8 Food Grade Silicone - White 310ml 
Soudal Adhesive Remover - 400ml 
ALM Code 7 Milled Lead - 150mm x 6m 
OX Pro Dry Wall Internal Corner Trowel - 102mm x 127mm 
Everbuild Aquaseal Liquid Roof – Slate Grey 21kg 
Code 4 Cast Lead - 510mm x 6m 
Everbuild Stixall Extreme Power - Grey 290ml (Box of 12) 
ALM Code 3 Milled Lead - 914mm x 3m 
ALM Code 8 Milled Lead - 180mm x 6m 
Standard Brush 2-Inch 
Everbuild Forever Grey Silicone Sealant – 295ml (Box of 12) 
Ronseal One Coat All Surface Primer and Undercoat - White 250ml 
Hambleside Danelaw Double Plain Tile Vent, TV10/9 - Slate Grey (Box of 5) 
Everbuild Patio Wizard – 1 Litre 
ALM Code 6 Milled Lead Flashing - 450mm x 3m 
Timloc Over Fascia Vent - 1m 
Code 8 Cast Lead - 450mm x 3m 
Easy-Trim End Cap Angled - Black (Box of 10) 
Code 6 Cast Lead - 850mm x 6m 
Ronseal One Coat Damp Seal - White 750ml 
Evo-Stik Liquid Nails Solvent Free - Buff 290ml 
Everbuild Multi-Stick Adhesive - White 350ml 
Bond It Saves Nails Instant Grab Adhesive - EU3 Beige 
This Frame-Mate Door & Window Sealant from Bond It has excellent adhesion and filling qualities, ideal for joints with low movement. This product offers waterproof acrylic protection, perfect for your typical doors & window frames. It's suitable for concrete, wood, brick, natural stone, artificial stone and most other building materials.
However, on some surfaces, it may be appropriate to put a primer onto it first, this encourages the bonding process and secures the sealant.
Application
Prepare the area before application, including removing all dust and similar contaminants that can hinder the adhesion, ensuring it's clean and dry. If the application involves mechanical means, using a solvent like acetone to degrease and prepare the surface is recommended.
- Using a standard sealant gun, sealant onto the gun
- Cut the nozzle at an angle of 45°, with the size of the nozzle being slightly larger than the gap intending to fill
- Apply the sealant to the area
- Once applied, tool down using a sealant applicator tool wetted with soapy water (Can use a plastic spatula)
