Ronseal Big Hole Smooth Finish Filler - Grey 1.2Kg 
OX Pro Aluminium Metric Rafters Square - 300mm 
Code 7 Cast Lead - 1600mm x 3m 
Bond It Power Mix Concentrated Liquid Mortar Plasticiser - 1L Brown 
Everbuild Everflex 200 Contractors LMA Silicone - Black 295ml (Box of 25) 
Code 5 Cast Lead - 1200mm x 6m 
Everbuild Carpet Fix Cloth Tape – 50mm x 25m 
Timloc Single Pantile Tile Vent Brown (Box of 11) 
Timco 5 x 8m Heavy Duty Tarpaulin, Green 
Ronseal Exterior Yacht Varnish - Gloss 250ml 
Everbuild ASBO Graffiti Remover - 400ml 
Everbuild Resiblock Trade – Clear 5 Litre 
Hambleside Danelaw Double Roman Tile Vent TV15/3 - Antique Red (Box of 5) 
Everbuild Black Jack 901 Black Bitumen Paint – 2.5 Litre 
Code 6 Cast Lead - 150mm x 6m 
Bond It Roof-Mate Roof & Gutter Sealant - Black EU3 
Bond It Pro-Mate LMA Silicone - Translucent EU3 
Timco Chalk Line Set 
Everbuild Black Jack 908 DPM – 5 Litre 
Everbuild Firefoam B2 Gun Grade - Pink 750ml 
ALM Code 7 Milled Lead - 1600mm x 3m 
Hambleside Danelaw TV15/4 Tile Vent - Black (Box of 5) 
Soudal B2 Fire Rated Expanding Foam Gun Grade - 750ml 
OB41 Foaming Glass Cleaner - 400ml 
FloPlast Square Line Stop End Outlet Black – 114mm x 65mm 
Soudal Orange Skeleton Gun - Up to 310ml 
This Squeezy, Solvent-Free Adhesive by Bond It excels at delivering great adhesive results without harming the environment. Irrespective of your experience, this product comes straight from the bottle and can be applied directly easily.
Uses
Ideal for most common surfaces around the house, areas this product typically is applied to is; panelling, plasterboard, cove basing, window sills, styrofoam, carpet tack strips, aluminium, steel, wood, concrete, cork, fireplace, and tub surrounds.
- Plastics
- Wood
- Steel
- Aluminium
- Wood
- Styrofoam
- Concrete
- Brick
- Plasterboard
- Carpet
- Metal
- Cork
Preparation
Before the application can begin, you must prepare the surfaces by removing any contaminants that can hinder the adhesion; this includes oil, grease, dirt, dust and similar impurities.
Application
- Remove the cap from the product
- Cut the nozzle at a 45° angle with an opening slightly larger than the gap to be filled
- Squeeze the tube onto one of the two surfaces
- Bring together and firmly support for 24 hours
- Excess sealant needs removal with water before drying
Limitation
Any areas that are totally encapsulated joints will not dry completely, if both surfaces are porous, this product will not work fully. This adhesive won't apply to asphalt, bitumen, external dampness, or fully immersed areas.
