Everbuild Stixall Extreme Power - Grey 290ml (Box of 12) 
Everbuild Everflex 115 G.P Building Mastic - Brown 285ml (Box of 25) 
Soudal Soudafoam Gap Filler Hand Held 750ml 
Timco Cloth Tape White - 50m x 48mm 
OX Pro Grout Remover 
Bond It Aerosol Spray Adhesive 500ml Beige - Box of 12 
Bond It Felt Adhesive - Black 1L 
Hambleside Danelaw (HD TVA) Tile Vent Adaptor for TV15 Range 
Over Fascia Vent, 10mm 
OB1 Diamond Crystal Clear Universal Sealant & Adhesive 290ml 
ALM Code 3 Milled Lead - 210mm x 3m 
Everbuild Filler Coat – White 5 Litre 
ALM Code 4 Milled Lead - 150mm x 3m 
Sika MultiSeal Self Adhesive Bituminous Sealing Tape - Grey (225mm x 10m) 
ALM Code 7 Milled Lead - 450mm x 6m 
Gorilla Glue - Dark Brown 60ml 
Everbuild Black Jack 901 Black Bitumen Paint – 5 Litre 
Hambleside Danelaw Double Pantile Vent TV15/2 - Brown (Box of 5) 
Timloc Plain Tile Vent Terracotta (Box of 14) 
Code 3 Cast Lead - 450mm x 3m 
ALM Code 6 Milled Lead Flashing - 240mm x 3m 
Timco High Visibility Wet Paint Tape 
Code 7 Cast Lead - 1200mm x 3m 
OX Tools Plasterers Bucket, Blue – 25 Litre 
Ronseal Knot Block Primer & Undercoat - White 250ml 
Everbuild Everflex AquaMate Aquarium Sealant – Translucent 295ml (Box of 12) 
Ronseal Interior Varnish - Clear Satin 2.5L 
Siroflex Trade High Viscosity Superglue - 20g 
This Squeezy, Solvent-Free Adhesive by Bond It excels at delivering great adhesive results without harming the environment. Irrespective of your experience, this product comes straight from the bottle and can be applied directly easily.
Uses
Ideal for most common surfaces around the house, areas this product typically is applied to is; panelling, plasterboard, cove basing, window sills, styrofoam, carpet tack strips, aluminium, steel, wood, concrete, cork, fireplace, and tub surrounds.
- Plastics
- Wood
- Steel
- Aluminium
- Wood
- Styrofoam
- Concrete
- Brick
- Plasterboard
- Carpet
- Metal
- Cork
Preparation
Before the application can begin, you must prepare the surfaces by removing any contaminants that can hinder the adhesion; this includes oil, grease, dirt, dust and similar impurities.
Application
- Remove the cap from the product
- Cut the nozzle at a 45° angle with an opening slightly larger than the gap to be filled
- Squeeze the tube onto one of the two surfaces
- Bring together and firmly support for 24 hours
- Excess sealant needs removal with water before drying
Limitation
Any areas that are totally encapsulated joints will not dry completely, if both surfaces are porous, this product will not work fully. This adhesive won't apply to asphalt, bitumen, external dampness, or fully immersed areas.
