OB41 White Grease Spray - 400ml 
Code 7 Cast Lead - 150mm x 6m 
Bond It Superglue Activator Accelerator Spray Cyanoacrylate Aerosol - 400ml 
Sika MaxMix Waterproofer - 1 Litre 
Siroflex Trade Hand Held PU Expanding Foam 
Everbuild Pro Fill - Light Grey 500g 
Klober Throat Adaptor - KG8000-3 
Evo-Stik Roof & Gutter Sealant - Black 290ml 
Timco Ratcheting Screwdriver 46-Part Set 
FloPlast Square Line Internal Stop End White – 114mm 
ALM Code 7 Milled Lead - 600mm x 6m 
Ronseal Diamond Hard Floor Paint - Anthracite Satin 750ml 
Bond It One Hit Wonder Lightweight Filler - White 1L 
Timco Mixed Carriage Bolts, Nuts and Washers Grab Pack 
Soudal Cartridge Gun Heavy Duty - Black 310ml 
Timco Precision Screwdriver Set 6pcs 
FloPlast Half Round Downpipe Shoe, Brown – 68mm 
Everbuild Bath & Kitchen Sealant - 200ml 
Everbuild 206 Strike Release Oil – 5 Litre 
OX Tools OX Pro Aluminium Kevlar Chalk Line Reel and Refill 
Hambleside Danelaw TV15/7 Tile Vent - Terracotta (Box of 5) 
Freeflow Square Gutter System Internal Stopend - White 
Everbuild Constructa-Pro Adhesive Foam - Grey 750ml 
Bond It Dec-Mate Flexible Filler - White EU4 
Easy-Trim Over Fascia Vent - 10mm x 500mm (Box of 60) 
Uses
The Lumberjack 30 Min PU Wood Adhesive by Everbuild offers outstanding bonding to common building surfaces and wood. Everbuild's technicians formulated this product to deliver a 30-minute curing time, allowing faster application, perfect for line manufacturing. Other manufacturing areas this is perfect for include manufacturing doors and windows, furniture and the construction of staircases and ladders.
Preparation
You should prepare the surface before starting the application, removing any contaminants on the surface, such as dirt, dust, oil, grease, etc. You need at least one surface to be porous; non-porous surfaces should be abraded to provide a key for the adhesive. You can further enhance the adhesion by slightly moistening one surface with a damp cloth; do not over-wet.
Application
- Cut the top of the cartridge, taking care not to damage the threaded screw.
- Cut the nozzle at a 45° angle and fit it into a standard sealant gun/applicator.
- Using a firm pressure on the handle, apply the adhesive to one surface, and after applying it, bring the two surfaces together immediately.
Limitations
- One surface must be porous for successful bonding
- Not suitable for polyethylene, polypropylene, Teflon or Nylon.
- Surfaces must be damp, but the moisture content of wood must not exceed 30% w/w
- Only apply this product between the temperature of 5°C to 30°C
- Setting times will be increased at low temperatures and low humidity.
