Klober Profile-Line Twin Plain Tile Vent - Brown KG9861-0247 (Box of 10) 
ALM Code 5 Milled Lead - 600mm x 3m 
Everbuild 502 Wood Adhesive – 1 Litre 
Bond It Economy Sealant Gun - Blue 900ml 
Sika Dustproofer – Clear 5 Litre 
Bond It Cyanoacrylate Superglue Medium Viscosity, Clear - 20g 
Hambleside Danelaw TV15/7 Tile Vent - Brown (Box of 5) 
Everbuild Multi-Stick Adhesive - White 350ml 
Cromar Cold Gritting Solution - Black 5 Litres 
Code 6 Cast Lead - 510mm x 6m 
Everbuild Everflex 200 Contractors LMA Silicone - Brown 295ml 
ALM Code 6 Milled Lead Flashing - 800mm x 6m 
FloPlast Square Line Stop End Outlet Black – 114mm x 65mm 
Bostik Brushable Waterproofer - Black 5L 
ALM Code 8 Milled Lead - 914mm x 3m 
Soudal Handheld Gap Filler Expanding Foam - Champagne 750ml 
ALM Code 3 Milled Lead - 450mm x 6m 
Code 8 Cast Lead - 1000mm x 3m 
Evo-Stik 528 Instant Contact Adhesive – 5 Litre 
Siroflex Trade High Viscosity Superglue - 20g 
Soudal Genius Gun Building Adhesive 750ml - Champagne 
Everbuild Feb® Rendamix - 5L Amber 
Everbuild EuroScrim Plasterboard Tape – 48mm x 90m 
Uses
Stick2 All Purpose Clear Adhesive by Everbuild is excellent for bonding various surfaces together, and it can be used for most common household surfaces. However, it also includes;
- Ceramics
- Porcelain
- Wood
- Card
- Paper
- Most Plastics
- Leather
- Cork
- Linoleum
- Rubber
- Stone
- Glass
- Metals
- Dense fabric
Preparation
Ensure you prepare the surface before application; this is to optimise adhesion. Complete this by removing contaminants that can hinder the adhesion, such as dust, oil, grease etc.
Application
Porous Surface:
- Unscrew the cap and spread a thin, even adhesive layer onto one of the surfaces.
- Bring the surfaces together and hold them firmly.
Non-Porous Surface:
- Improve adhesion by abrading both surfaces with sandpaper
- Unscrew the cap and spread a thin, even layer of adhesive onto both surfaces
- Allow adhesive to dry to a tough tacky finish (5 - 10 minutes), then press firmly on both surfaces.
With both types of surfaces, the full strength of this adhesive is achieved within 24 hours with the temperature at 20°C
Limitations
- Will not stick polyethene, polypropylene or PTFE
- This product is not suitable for bonding acetate, rayon or items which contain a hot fluid
- Do not use this product near polish or some painted surfaces
- Do not apply this product to an area which is immersed in water
- This product is unsuitable for bitumen, asphalt, or cellulose-painted surfaces.
