ALM Code 7 Milled Lead - 300mm x 3m 
OX Tuff Carbon Marking Pencil Value Pack 
Ronseal Kitchen & Bathroom Touch-Up Enamel - 10ml 
Timco Copper Disc Rivets 
ERidge Dry Fix Ridge System Black – 6m Kit 
Code 5 Cast Lead - 850mm x 6m 
Timco Assorted Horseshoe Shims - 1.0 to 6.0mm (Box of 400) 
Everbuild Showerproof Bathroom Silicone - Clear 280ml (Box of 12) 
10 x Permavent Black Breather Membrane – 1m x 50m 
Ronseal Multi Purpose Smooth Finish Filler - 2.2Kg 
Soudal Soudatherm Roof 250 - 800ml (Box of 12) 
Ronseal One Coat Stain Block - White 750ml 
Soudal Roof & Gutter Sealant – Black 290ml (Box of 12) 
Soudal Insulating Foam Genius Gun 750ml - Champagne 
Everbuild Lumberjack 30 Minute PU Wood Adhesive Liquid – 750ml (Box of 12) 
ALM Code 6 Milled Lead Flashing - 300mm x 3m 
Code 3 Cast Lead - 510mm x 3m 
Bond It Rubber Bitumen Emulsion - Black 25L 
Everbuild Stainblock - White 400ml 
OX Pro Mortar Spike, 300mm 
Everbuild Professional Sealant Gun – C4 (290 - 380ml) 
OX Pro Harling Trowel - 165mm X 165mm 
Everbuild Tecnic Silicone 825 – Limestone White 380ml (Box of 25) 
SikaGard Wood Preserver - Clear 5 Litre 
Armatool Lead Dresser Set - 5 Piece Set 
Circular Soffit Vent, Brown 
Everbuild Showerproof Bathroom Silicone – White 280ml 
Timloc Interlocking Plain Tile Vent Grey (Box of 12) 
FloPlast Half Round Gutter Angle 135°, Brown – 112mm 
Soudal B2 Fire Rated Expanding Foam Gun Grade - 750ml 
Uses
The Triple Action Wood Treatment by Everbuild is the ultimate wood-treating product on the market. It is crafted to cater to both wood treatment and preservation simultaneously, using a low-odour solution based on micro-fine technology with added fungicides, algaecides and Permethrin. This formula actively combats wet rot, dry rot, and kills fungi and wood-boring insects. The applications areas this product is typically applied include;
- Sheds and garages
- Fencing and farm buildings
- Roof beams and joists
- Garden furniture
- Floorboards
- Window frames and doors
Preparation
Prepare the application area by ensuring that it's clean and free from paint varnish, stain, grease, bark or other impurities. You can apply this product to a damp surface. Any decay present must be removed and replaced with a sound, treated timber.
Application
- Shake well before use.
- Apply by using either a brush, spray or dipping.
- After the first coat has dried, you should apply a second,
- It is important to pay attention and to soak the end grains thoroughly; for optimal protection, dip the end grains for at least 3 minutes.
Limitations
- Do not dilute this product, as it is ready to use
- This should not be applied to surfaces that food is prepared on
- Avoid contact with bitumen, roofing felt or plastics
- External timbers must be overcoated to reduce environmental impact
- You should use coarse rather than fine mist generators
- This should only be used as specified, as a surface biocide and wood preservative.
