Everbuild Feb® Rendamix - 5L Amber 
Bond It PVA & Adhesive Sealer White 1L - Box of 12 
Code 6 Cast Lead - 450mm x 6m 
Everbuild Forever Ivory Silicone Sealant – 295ml (Box of 12) 
FloPlast Square Line Gutter Angle 135° Black 
Ronseal Stays White One Coat Non-Drip Paint - Matt 750ml 
Bond It B3 Fill And Fix Expanding Foam Gun Grade - Beige 750ml 
Ronseal Diamond Hard Floor Varnish - Clear Satin 2.5L 
Bond It AS900 Acoustic Sealant White 900ml - Box of 12 
Everbuild Filler Coat – White 5 Litre 
FloPlast Square Line Gutter 90° Black – 114mm 
Evo-Stik Impact Adhesive - 500ml 
Bond It No Crack Caulk - White 310ml 
Soudal Insulating Foam Genius Gun 750ml - Champagne (Box of 12) 
Everbuild Febond PVA - 2.5L 
Soudafoam Gap Filler Gun Grade – 750ml 
Everbuild Jetcem Plaster Rapid Repair – 6kg 
Patination Oil Lead Mate Flashing Protection Coating - 500ML 
Everbuild Black Jack 902 Bitumen & Flashing Primer – 1 Litre 
OX Pro Magnetic Level 600mm 
Everbuild Stick2 Industrial Superglue GP - Transparent 20g 
Bond It Rain-Mate All Weather Sealant - Black EU3 
Ronseal Ultra Tough Hardglaze Clear Varnish - 750ml 
Ronseal One Coat Stays White Radiator Paint - Matt 750ml 
Code 5 Cast Lead - 914mm x 3m 
Freeflow 65mm Square Gutter Drain Pipe 112° Branch - Black 
Ulti-Mate 110/110mm Flexipipe 
Restec CSM Fibreglass Roll 450g/m² - (15m² Roll) 
Estwing Hammer Curved Claw Smooth Face - 20oz 
ALM Code 7 Milled Lead - 150mm x 6m 
The Everflex 450 Builders Silicone by Everbuild is a fantastic, versatile silicone sealant that offers outstanding adhesion to various surfaces. Suitable not only for perimeter pointing but also for bonding two surfaces and filling expansion joints, it is an all-in-one product. Other unique features of this product are its ability to seal soft metals, general glazing sealing and draughtproofing.
Preparation
It's essential to correctly prepare the area for application before starting. Otherwise, you risk not having optimal results. You should clean the surface by removing any contaminants that can hinder the adhesion, including impurities such as dirt, dust, oil, grease, etc.
Application
- Cut the top of the cartridge, ensuring you do not damage the threaded screw.
- Cut the top of the nozzle at a 45° angle and screw it onto the top of the cartridge.
- Place the cartridge into the standard sealant gun/applicator.
- For perimeter pointing, you should apply an even, continuous pressure along the gap. When bonding two surfaces, you should cover one surface with a zig-zag motion using the silicone and bring them together.
Limitations
- You should not use this product in conjunction with bitumen, asphalt, neoprene and certain organic elastomers
- This product is unsuitable to be used for aquarium manufacturing
- Substrates that bleed oils or plasticisers shouldn't have contact with this product
- This product is not suitable for paints to be applied over, nor is it applicable as a mirror adhesive.
