ALM Code 5 Milled Lead - 210mm x 6m 
Bond It B3 Fill And Fix Expanding Foam Aerosol - Beige 500ml 
Siroflex Painters Caulk-It - 380ml 
Code 3 Cast Lead - 150mm x 3m 
Code 7 Cast Lead - 760mm x 3m 
Bond It Aluminium Foil Tape - 50mm x 45M (Box of 24) 
Bond It FG8 Food Grade Silicone - White 310ml 
Soudal Adhesive Remover - 400ml 
ALM Code 7 Milled Lead - 150mm x 6m 
OX Pro Dry Wall Internal Corner Trowel - 102mm x 127mm 
Everbuild Aquaseal Liquid Roof – Slate Grey 21kg 
Code 4 Cast Lead - 510mm x 6m 
Everbuild Stixall Extreme Power - Grey 290ml (Box of 12) 
ALM Code 3 Milled Lead - 914mm x 3m 
ALM Code 8 Milled Lead - 180mm x 6m 
Standard Brush 2-Inch 
Everbuild Forever Grey Silicone Sealant – 295ml (Box of 12) 
Ronseal One Coat All Surface Primer and Undercoat - White 250ml 
Hambleside Danelaw Double Plain Tile Vent, TV10/9 - Slate Grey (Box of 5) 
Everbuild Patio Wizard – 1 Litre 
ALM Code 6 Milled Lead Flashing - 450mm x 3m 
Timloc Over Fascia Vent - 1m 
Code 8 Cast Lead - 450mm x 3m 
Easy-Trim End Cap Angled - Black (Box of 10) 
Code 6 Cast Lead - 850mm x 6m 
Ronseal One Coat Damp Seal - White 750ml 
Evo-Stik Liquid Nails Solvent Free - Buff 290ml 
Everbuild Multi-Stick Adhesive - White 350ml 
Bond It Saves Nails Instant Grab Adhesive - EU3 Beige 
Pinkgrip Dryfix Applicator Gun 
Everbuild Resiblock Block Paving Sealer - Matt 5 Litre 
Ronseal Diamond Hard Floor Varnish - Clear Gloss is the ultimate floor varnish that offers excellent protection whilst delivering outstanding, long-lasting colour.
This unique formula is suitable for application on unvarnished and previously varnished floors, allowing you to rejuvenate old flooring and give it another life.
Preparation
It's ideal to apply this product at room temperature above 10°C. When applying this product to unvarnished floors, you should sand across the whole surface. Using either an electric sander or a 120-grit sandpaper. Whilst doing this, you should wear a face mask, and afterwards, you should clean the floor, removing the dust using white spirit and a cloth or hoover.
With floors that have been previously varnished, you should lightly sand the surface with 120-grit sandpaper. If the old varnishing is flaking you should sand it all away so it's back to the bare wood. This should be done while wearing a face mask and any dust cleaned using white spirit and a cloth/hoover.
Application
- When cracking the tin open, thoroughly stir it to ensure no lumps in the mixture.
- Using a 4" brush, start from the furthest corner of the door. Working along the floorboards, ensuring you apply an even coat across.
- Allow 2 hours to pass before applying a second coat.
- Before applying the 3rd coat, you should lightly sand the surface using 240-grit sandpaper; this helps the final coat reach an optimal finish.
- You'll be able to walk on the floor 2 hours after application. You should wait 24 hours before re-introducing furniture back into the room. In 72 hours, the diamond-hard protection will be active.
Aftercare
After 72 hours have passed and the diamond-hard protection has activated, you can clean the surface as normal, and it would help if you did this to preserve the quality of the floor varnish.
Any tools used during the application can be cleaned using warm, soapy water. If you notice any surface damage over time, lightly sand the affected area and re-apply another 3 coats.
