Klober Univeral Angle Ridge End - Grey 
Evo-Stik Seriously Strong Stuff Fast Setting Adhesive, White - 290ml 
Cromar Cromaprufe - Black 5 Litre 
Soudal Genius Gun Building Adhesive 750ml - Champagne 
Everbuild Stick2 Industrial Superglue GP - Transparent 20g 
Hedgehog Gutter Brush Leaf Guard Black – 4m x 125mm 
Code 8 Cast Lead - 1200mm x 6m 
ALM Code 3 Milled Lead - 390mm x 6m 
ALM Code 7 Milled Lead - 240mm x 3m 
Bond It Bitumen Paint - Black 5L 
Everbuild Everflex Premium+ 565 Clean Room Silicone – White 295ml (Box of 25) 
Everbuild 701 Non-Slip Tile Adhesive – White 3.75kg 
Everbuild Pro Fill - Light Grey 500g 
Code 5 Cast Lead - 510mm x 3m 
Easy-Trim Universal Dry Verge Unit - Black 
Klober Regent Tile Vent KG6084, Dark Brown 
Easy-Trim Over Fascia Vent - 10mm x 500mm (Box of 60) 
Everbuild Resiblock Block Paving Sealer - Matt 5 Litre 
Everbuild Lumberjack 550 Floor Adhesive – Buff 300ml 
Over Fascia Vent, 25mm Single 
Ronseal Kitchen & Bathroom Touch-Up Enamel - 10ml 
ALM Code 6 Milled Lead Flashing - 150mm x 6m 
Everbuild Everflex Pyro Mate Fire Rated Silicone – White 295ml (Box of 12) 
Code 6 Cast Lead - 1000mm x 6m 
Ronseal Stays White One Coat Non-Drip Paint - Matt 2.5L 
Uses
The Multi-Purpose Powder Smooth Filler by Ronseal delivers excellent, quick internal repairs for various surfaces. Its high-quality formula offers a robust, long-lasting repair supporting gaps up to 40mm. Some of the surfaces that this product is suitable for include;
- Plaster (Internal only)
- Stone (Internal & External)
- Concrete (Internal & External)
- Wood (Internal & External)
Preparation
Before applying, ensure you prepare the surface to optimise the adhesion. To clean the area, wipe it down, removing any dust, grease, dirt and other contaminants that can interfere with the bonding.
Application
- Using the measuring scoop, measure 2 parts filler and mix it with 1 part water.
- Fill the hole using the formula you've created, ensuring you cover all cracks and crevices.
- Smooth it down with a wet knife once you've filled the area, but make sure it bulges out slightly to allow sanding when dry for a smooth, flush finish.
- If the gap is more significant than 40mm, apply in intervals of 40mm, giving a couple of hours to dry between each layer.
- After filling the entire area, give it a couple of hours to dry and then sand it down.
Aftercare
Remove any excess formula on any tools using a damp cloth
