Bond It Bath Mate Bath & Kitchen Sealant - White EU3 Box of 25 
Thompson's Patio & Block Paving Seal - Natural 5L 
OX Trade Stubby Level - 100mm 
Code 6 Cast Lead - 800mm x 3m 
Standard Brush 2-Inch 
Timco 8 Spanner Set 
Bond It 5 Minute PU Wood Gel - Translucent 300ml 
Soudal Genius Gun Gap Filler Expanding Foam - 600ml 
SikaFlex EBT+ Polyurethane Adhesive & Sealant, Grey - 300ml (Box of 12) 
Everbuild Showerproof Bathroom Silicone – White 280ml 
Ronseal Stays White Ultra Tough White Matt Paint - 2.5L 
Everbuild Everflex Mirror Mate Adhesive - White 290ml 
Everflex Premium+ 450 Builders Silicone – Brown 300ml (Box of 25) 
Thompson's One Coat Waterseal - 1L 
Permavent Plain Easy - Box of 20 
ALM Code 8 Milled Lead - 1000mm x 6m 
Everbuild Stixall Extreme Power – Black 290ml 
ALM Code 6 Milled Lead Flashing - 1200mm x 6m 
Code 8 Cast Lead - 800mm x 3m 
Soudal Insulating Foam Genius Gun 750ml - Champagne (Box of 12) 
Cromar Vent 3 Classic Breathable Membrane - 1m x 50m 
Code 4 Cast Lead - 1000mm x 6m 
Soudal Repair Express Plaster - White 250ml 
Bond It Mega Stik PU Adhesive - Beige 750ml 
ALM Code 3 Milled Lead - 1000mm x 6m 
Soudal Soudatherm Roof 250 - 800ml 
ALM Code 4 Milled Lead - 150mm x 3m 
ALM Code 7 Milled Lead - 914mm x 6m 
Oxyturbo Turbo Set 90 Lead Welding & Lead Burning Kit 
Uses
The Quick Dry Radiator Spray by Ronseal gives your radiator a new life with its intense white colour that illuminates the radiator. Its unique formula makes it heat resistant, preventing cracks from occurring over time. You should look to apply 3 coats of this spray onto your radiator to achieve the optimal finish.
Preparation
Before commencing the application, prepare the area by opening doors and windows for ventilation, and place dust sheets around the area to prevent any of the spray paint from flying onto random surfaces.
Application
- Shake the can, ensuring it rattles around for at least 1 minute
- Hold the can 20-30cm away from the surface, spraying in a sweeping motion
- Wait 30 minutes for the first coat to dry, then apply a second coating in the same fashion.
- Wait 30 minutes for the second coat to dry, then apply the third and final coat.
- Leave the radiator for at least 24 hours to fully dry before turning the radiator back on.
Aftercare
To ensure you are getting the most out of the radiator paint, you should maintain its quality by regularly cleaning and dusting it. To clean the spray can, turn it upside down and spray for a few seconds, using a damp cloth to wipe the nozzle.
