Everbuild 501 PVA - 1 Litre 
Code 5 Cast Lead - 800mm x 3m 
Bostik Flashband Self Adhesive Flashing Tape – Grey 3.75m x 75mm 
Bondit Monster Mesh Pink 50m x 1m - 160g/m2 
ALM Code 5 Milled Lead - 390mm x 6m 
ALM Code 6 Milled Lead Flashing - 1600mm x 6m 
Timco Classic Pozi Multi-Purpose Screws - Mixed Tray 
ALM Code 3 Milled Lead - 600mm x 6m 
Klober Single Pantile Vent - Brown KG9860-0247 (Box of 10) 
Ronseal One Coat Water-Based Tile Paint - White Gloss 750ml 
Soudal Roof & Gutter Sealant – Black 290ml 
Code 6 Cast Lead - 450mm x 3m 
Soudal Silicone Sealant Remover, Clear - 100ml 
Code 7 Cast Lead - 1600mm x 3m 
Bond It Monster Water Resistant Tape - 48mm x 11m (Black) 
Soudal Gap Filler Expanding Foam Genius Gun 300ml - Champagne (Box of 12) 
Ronseal Stays White 2in1 Paint & Primer - Matt 750ml 
ALM Code 4 Milled Lead - 914mm x 6m 
Ronseal One Coat Damp Seal - White 750ml 
Everbuild Multi-Purpose Wood Filler - 250ml Dark Oak 
Everbuild Stick2 Industrial Superglue GP - Transparent 20g 
Timco Mixed Hose Clips 
Bond It Oil Stain Remover - White 1L 
Bond It All Weather Roofing Compound - Black 2.5L 
Soudal 5 Minute D4 Wood Adhesive Liquid – 750g (Box of 12) 
OX Pro Impact Bit Set - 11 Piece 
Bond It AS900 Acoustic Sealant - White 900ml 
OX Tools OXIT Sealant & Adhesive - Black 290ml (Box of 12) 
Hambleside Danelaw TV15/1 Flush Fitting Tile Vent - Brown (Box of 5) 
Uses
The Mitre Kit by Soudal is an excellent product that enhances your D.I.Y or Tradey life with exceptional bonding strength and speed. The two-component mitre kit by Soudal securely bonds mitre joints with a superior bond in less than a minute, with the activator component enhancing bonding strength and curing speeds. It's versatile with various substrates and suitable for bonding;
- Wooden mitre joints
- Plastic
- Metal
- Timber
- Porcelain
- Cork
- Leather
- Ceramics
- Cardboard
- Peper
- Rubber
Preparation
Ensure that both surfaces are bonded and sit flush with each other. Alongside that, ensure that it's free from contaminants, including dirt, dust, grease, oil, and anything that can interfere with the bonding.
Application
- Spray one surface with the activator component
- Apply the adhesive to the other surfaces
- Bring the two together and hold firmly for at least 1 minute.
Limitations and Notes
- Any unwanted adhesive that's cured must be removed mechanically
- Using the kit without the activator significantly reduces curing speeds
- After use, clean the nozzle and tube using a needle and close the cap
