Everbuild Stixall Extreme Power - Brown 290ml (Box of 12) 
Bond It Stabilizing Solution - White 5L 
Timco Flat Wood Bit Set 
Soudal Mitre Kit 50g + 200ml - Clear 
Timco FirmaHold Collated Brad A2 Stainless Steel Nails - 16G x 50mm (2000 Pieces) 
Timco Velocity Premium Multi-Use Screws - Mixed Tray 
Hedgehog Gutter Brush Leaf Guard Black – 4m x 125mm 
Soudal Grab Solvent Based Adhesive, Beige 
ALM Code 4 Milled Lead - 450mm x 3m 
Sika Dustproofer – Clear 5 Litre 
Bond It Mirror Pro Adhesive - White EU3 
Everbuild Anchorset Green 300 - Grey 300ml 
Timco Lithium EP2 Grease - 400g 
Timco Nut Mix Grab Pack - 980 Pieces 
ALM Code 3 Milled Lead - 510mm x 3m 
Timloc Castellated Tile Vent Grey (Box of 8) 
Klober Small Slate Vent - Slate Grey 
Everbuild 402 Waterseal – 25 Litre 
FloPlast Half Round Internal Stop End, Black – 112mm 
Klober Profile-Line Twin Plain Tile Vent - Brown KG9861-0247 (Box of 10) 
Everbuild 709 FebFlor Floor-Flex Plus - 5 Litre 
Right Hand Klober Contract Dry Verge Unit Brown 
Freeflow 112mm Gutter Internal Stop End - Black 
Bond It No Crack Caulk - White 310ml 
Uses
The Soudaduct by Soudal is an acrylic polymer-based, plasto-elastic, solvent-free HVAC ducting sealant suitable for sealing every type of metal duct. It offers excellent adhesion on both galvanised and stainless steel, yet remains flexible and can even be painted once it is fully cured, allowing it to fit in with it's surroundings. It's suitable for joints with a movement max of 12.5% and achieves all requirements in DW144 standards and regulations.
Preparation
Before commencing the application, ensure that the surfaces involved in the application are free from dirt, dust, grease, oil, etc; after you've cleaned them, make sure the surface is bone dry.
Application
- Cut the top of the cartridge, taking care not to damage the threaded screw.
- Cut the nozzle at a 45° angle with an opening slightly larger than the gap to be filled.
- Place it into a suitable sealant applicator tool and apply the material to the surface.
- Smooth it down using a smoothing tool, putty knife, etc, to a smooth finish.
- Ensure that all gaps, cracks and areas of the duct system are sealed to ensure an airtight system.
Limitation and Notes
- Do not apply this product in areas subject to constant water immersion.
- This product is suitable for painting, but preliminary tests must be completed to ensure compatibility before finishing the full job.
- Allow the sealant to cure for 12-24 hours before using the air system.
- This product is not suitable for external use.
