Bostik Flexacryl Instant Repair Waterproofing - Grey 5kg 
IKO Shed Felt - Black 8m Roll 
Bond It Decking Oil - Natural 2.5L 
Soudal B2 Fire & Acoustic Expanding Foam – 750ml 
Everbuild Maximum Torque - White 290ml 
Code 7 Cast Lead - 210mm x 3m 
Ronseal Precision Finish Brush - 1.5 Inch 
Soudal B2 Fire Rated Expanding Foam Gun Grade - 750ml 
Everbuild Bath & Kitchen Sealant - 200ml 
Code 8 Cast Lead - 1200mm x 6m 
Everbuild Pinkgrip Adhesive Solvent Based – 350ml 
Freeflow Square Gutter System Running Outlet - Black 
Cromar Bitumen Primer – Black 1 Litre 
Bond It Rubber Bitumen Emulsion - Black 5L 
Everbuild Lumberjack 30 Minute Polyurethane Wood Adhesive Liquid – 750ml 
Everbuild Lead Mate Patination Oil – 1 Litre 
Soudal Repair Express Cement – Grey 900ml 
Everbuild Multi-Use Monster Wonder Wipes Tub (500 Wipes) 
Soudal Genius Gun Soudafoam Window and Door - 600ml (Box of 12) 
FloPlast FloGuard Gutter Guard - 5m (10 x 500mm) 
Everbuild Black Jack 904 Roof Felt Adhesive – 1 Litre 
Everbuild Everflex 200 Contractors LMA Silicone - Black 295ml (Box of 25) 
Timloc Double Pantile Tile Vent Brown (Box of 6) 
ALM Code 3 Milled Lead - 760mm x 3m 
84 x ERidge Dry Fix Ridge System Black – 6m Kit 
Klober Single Pantile Vent - Slate Grey KG9860-0429 (Box of 10) 
Everbuild Glass Protector - Red (600mm x 25m) 
Ronseal Anti-Bacterial Worktop Oil - Clear 1L 
Code 5 Cast Lead - 1200mm x 3m 
Bond It Cover-It Carpet Protector - Clear 625mm X 50M 
Uses
The Water Seal by Thompson offers excellent surface protection due to its unique advanced formula. Thompson brewed this formula with a combination of alkyl polysiloxane resin and hydrophobic waxes, offering outstanding water protection. This product is designed to go on surfaces such as;
- Brick
- Mortar
- Concrete
- Stone
Preparation
Before application, give the surface a thorough scrub with a stiff bristle brush, and if any cracks are present, fill them in and do any pointing repairs required.
Application
- Give the tin a good shake
- Using a brush or roller, apply to the wall working at 1-metre sections, applying from the bottom upwards
- Once you've completed the first section, move on to the next, working from the bottom upwards
- Ensure you coat mortar lines and cover the whole wall, including isolated areas.
- Once the first coat has dried (average 2 hours, depending on the surface), apply the second coat.
Limitations
- Do not apply this product if the air or surface temperature is below 10°C
- If rain it is raining or imminent during the application and drying time, do not apply this product.
- This product is unsuitable for masonry paint or other pre-painted surfaces.
- Some substrates may darken when treated.
- Detergent should not be used to clean the surface which is being protected.
- This product is unsuitable for application on surfaces such as asphalt, synthetic fibres, plastics or natural rubber.
- This product is not suitable for application on wood.
- During application, ensure the environment is well-ventilated.
- This product is for external use only. Do not apply on floors, patios, ponds, roofs, garden retaining walls, below ground and damp-proof membranes where positive water pressure is likely.
