ALM Code 6 Milled Lead Flashing - 180mm x 6m 
FloPlast Half Round Gutter 135° - White 
OX Pro Tuff 3 Level Kit - 600, 1200 and 1800mm 
ALM Code 7 Milled Lead - 760mm x 3m 
Thompson's Patio & Block Paving Seal - Natural 5L 
1201 Telescopic Underfloor Vent 3-5 Courses 
Everbuild Lumberjack 550 Floor Adhesive – 600ml 
Cromar Roof Felt Adhesive - Black 2.5 Litre 
Freeflow 68mm Round Gutter Drain Pipe 112° Branch - White 
Code 7 Cast Lead - 300mm x 6m 
OX Pro OX-P133855 Easy Start Handsaw 550mm / 22in 
Bond It FG8 Food Grade Silicone - White 310ml 
Timco Round Wire Nails, Pack of 40 
Everbuild Stixall Extreme Power - Brown 290ml (Box of 12) 
Timco M5 Form A Washer DIN 125 - 50 Pieces 
Bond It Patio Blaster - Clear 2.5L 
Ronseal One Coat All Surface Primer and Undercoat - White 750ml 
Thompson's Patio & Block Paving Seal - Wet Look 5L 
Everbuild Multi-Stick Adhesive - White 350ml 
Ronseal 6 Year Anti Mould Paint - White Silk 2.5L 
Everbuild Anchorset Green 300 - Grey 300ml 
Bond It SBR Admixture - White 2.5L 
Everbuild Stick2 Hard Plastic Adhesive - 30ml 
Bond It D4 Professional Wood Adhesive - Clear 1L 
Soudal B2 Fire Rated Expanding Foam Gun Grade - 750ml (Box of 12) 
Timco Metal Tapping Screws - PZ Pan Self-Tapping 4 x 3/8 Pack of 1000 
Everbuild Mammoth Packaging Tape - 48mm x 50m 
OX Trade 3 Piece Paint Brush Set - 25/38/50mm 
Easy-Trim Over Fascia Vent - 10mm x 500mm (Box of 60) Roof Felt Adhesives
Best Sellers
-
Samac Roof Hip Irons – (3mm, 4mm and 5mm)
From: £6.49 Incl VAT £5.41 Excl VAT Select options This product has multiple variants. The options may be chosen on the product page -
Ronseal Multi Purpose Powder Smooth Finish Filler – 500g + 50%
£7.99 Incl VAT £6.66 Excl VAT Add to basket -
Ronseal One Coat Water-Based Tile Paint – Magnolia Satin 750ml
£25.32 Incl VAT £21.10 Excl VAT Add to basket -
Stanley Hi-Viz Tylon 5m/Ex19mm Tape
£5.59 Incl VAT £4.66 Excl VAT Read more -
ALM Code 5 Milled Lead – 850mm x 6m
£368.16 Incl VAT £306.80 Excl VAT Add to basket -
Bondit Monster Mesh Pink 50m x 1m – 160g/m2
£36.99 Incl VAT £30.83 Excl VAT Add to basket
Roof Felt Adhesives
Browse through our range of roof felt adhesives. At ERoofing, we stock a substantial range of high-quality felt adhesive that come in ranging sizes from 1 litre to 25 litre.
Applying Felt Adhesive
You must apply felt adhesive either using a stiff brush, mop or squeegee. To avoid thickening in cold weather, stock the felt adhesive in a warm room before — for more straightforward application.
Cromar Roofing Felt Adhesive, in particular, should be applied to the surface and left for 15 to 30 minutes (depending upon drying conditions) to develop its full thickness.
The felt should then be placed into the wet adhesive film carefully, rubbing or rolling each section down to ensure highest contact with the adhesive and to expel air trapped between the surface and the felt. Wherever possible, the felt should be unrolled into the roofing felt adhesive and rolled with a light roller (15 to 25kg).
The overlaps should be at least 75mm on the side and 150mm at the ends. To ensure a complete bond at the side and end laps, Cromar Roofing Felt Adhesive can be applied to the underside of the felt and well compacted.
When using with a timber structure, the first layer of felt must be nailed down. Successive layers of felt may then be bonded using Cromar Roofing Felt Adhesive.
When used on concrete surfaces that are porous, it will be necessary to prime the surface first, ensuring that the primer is completely dry before the first layer of felt is applied.
Twenty-four hours after laying felt, check all bondings to ensure that full adhesive has been obtained. Mainly check all laps.
