Code 7 Cast Lead - 150mm x 3m 
Freeflow 68mm Round Down Pipe Shoe - White 
Easy-Trim Ridge F Universal Dry Ridge System - 10m Kit 
FloPlast Half Round Downpipe 112° Bend, White 
Stanley Heavy-Duty Scraper - 75mm 
Bond It Bitumen Paint - Black 25L 
OX Pro Mini Round Point Shovel 
Everbuild Everflex Pyro Mate Fire Rated Silicone – White 295ml (Box of 12) 
Ronseal Anti-Bacterial Worktop Oil - Clear 500ml 
Bond It PVA & Adhesive Sealer - White 1L 
Ronseal Ultra Tough Mattcoat Clear Varnish - 750ml 
Everbuild Mammoth Packaging Tape - 48mm x 50m 
ALM Code 3 Milled Lead - 180mm x 6m 
Code 8 Cast Lead - 390mm x 3m 
Everbuild 502 Wood Adhesive – 5 Litre 
Bond It Decking Oil - Natural 2.5L 
Code 3 Cast Lead - 850mm x 6m 
Everbuild 209 Liquid Mortar Tone - Black 5 Litre 
Evo-Stik 528 Instant Contact Adhesive – 1 Litre 
FrogTape® Delicate Surface Masking Tape - Yellow 24mm x 41.1m 
Timco Extra Heavy Duty Hand Cleaner with Pump - 4 Litres 
Bond It Lead Pro Roofing & Flashing Sealant - Grey EU3 
Everbuild KOS Black Fire Cement - 500g 
Ronseal Wet Rot Wood Hardener - 250ml 
Copper Coil 20m x 50mm 
ALM Code 6 Milled Lead Flashing - 1200mm x 3m 
Timloc 1203 Underfloor Vent Horizontal Front Extension + 115mm 
ALM Code 8 Milled Lead - 450mm x 3m Roof Felt Adhesives
Best Sellers
-
Soudal Orange Skeleton Gun – Up to 310ml
£7.99 Incl VAT £6.66 Excl VAT Add to basket -
Ulti-Mate Forticrete SL8 Grey Tile Vent
£59.99 Incl VAT £49.99 Excl VAT Add to basket -
Timloc Single Pantile Tile Vent
From: £24.99 Incl VAT £20.83 Excl VAT Select options This product has multiple variants. The options may be chosen on the product page -
Thompson’s Advanced Brick & Mortar Cleaner – 5L
£29.99 Incl VAT £24.99 Excl VAT Read more -
Timloc Plastic Insulation Retaining Discs – 80mm Red (Pack of 250)
£19.99 Incl VAT £16.66 Excl VAT Add to basket -
Everbuild PVC Hazard Tape – Red/White (50mm x 33m)
£7.99 Incl VAT £6.66 Excl VAT Add to basket
Roof Felt Adhesives
Browse through our range of roof felt adhesives. At ERoofing, we stock a substantial range of high-quality felt adhesive that come in ranging sizes from 1 litre to 25 litre.
Applying Felt Adhesive
You must apply felt adhesive either using a stiff brush, mop or squeegee. To avoid thickening in cold weather, stock the felt adhesive in a warm room before — for more straightforward application.
Cromar Roofing Felt Adhesive, in particular, should be applied to the surface and left for 15 to 30 minutes (depending upon drying conditions) to develop its full thickness.
The felt should then be placed into the wet adhesive film carefully, rubbing or rolling each section down to ensure highest contact with the adhesive and to expel air trapped between the surface and the felt. Wherever possible, the felt should be unrolled into the roofing felt adhesive and rolled with a light roller (15 to 25kg).
The overlaps should be at least 75mm on the side and 150mm at the ends. To ensure a complete bond at the side and end laps, Cromar Roofing Felt Adhesive can be applied to the underside of the felt and well compacted.
When using with a timber structure, the first layer of felt must be nailed down. Successive layers of felt may then be bonded using Cromar Roofing Felt Adhesive.
When used on concrete surfaces that are porous, it will be necessary to prime the surface first, ensuring that the primer is completely dry before the first layer of felt is applied.
Twenty-four hours after laying felt, check all bondings to ensure that full adhesive has been obtained. Mainly check all laps.
