Soudal Trade PU Construction Adhesive - Beige 290ml 
OX Pro Grout Remover 
Everbuild Stick2 Hard Plastic Adhesive - 30ml 
Soudal Lead Sheet Sealant 290ml - Grey 
Ronseal Precision Finish Brush - 2 Inch 
ALM Code 8 Milled Lead - 150mm x 3m 
ALM Code 7 Milled Lead - 914mm x 6m 
Everbuild Everflex Contract 700T LMN Silicone - Translucent (Box of 25) 
Bond It Mega Foam Gun/Aerosol PU Expanding Foam - Beige 750ml 
Everbuild Aquaseal Liquid Roof – Slate Grey 7kg 
BORA Centipede 4ft x 4ft x 30in Unit - 4 X-Cups + 2 Clamp + C/S Bag 
Ronseal Precision Finish Brush - 3 Pack 
Klober Universal Tile Vent Antique Red KG9854 (Box of 10) 
Spax Pozi Pz3 Drill Bits - 25mm (Pack of 5) 
Soudal PU Plasterboard Adhesive - Genius Gun (Box of 12) 
Ronseal Hairline Crack Ready Mix Wall Filler - White 330g 
Code 4 Cast Lead - 800mm x 3m 
OX Trade Medium Red Carpenters Pencils - Pack of 10 
OX Tools Pro Heavy Duty Flexi Tub - 20L 
ALM Code 4 Milled Lead - 450mm x 3m 
Code 8 Cast Lead - 210mm x 6m 
ALM Code 3 Milled Lead - 390mm x 3m 
OX Trade Metric Tape Measure - 8m 
Soudal Repair Express Plaster - White 900ml 
Code 6 Cast Lead - 1600mm x 3m 
Everbuild 202 Integral Liquid Waterproofer – 5 Litre Roof Felt Adhesives
Best Sellers
-
Hambleside Danelaw Double Roman Tile Vent, TV15/3 – Brown (Box of 5)
£114.99 Incl VAT £95.83 Excl VAT Add to basket -
Permavent Eco Breather Membrane 1m x 50m
£31.98 Incl VAT £26.65 Excl VAT Add to basket -
Ox Tools Waterproof Latex Gloves Size 9 Large
£8.99 Incl VAT £7.49 Excl VAT Add to basket -
Bond It Rubber Bitumen Emulsion – Black 5L
£21.99 Incl VAT £18.33 Excl VAT Add to basket -
Everbuild Jetcem Deep Rapid Repair Sand & Cement – 6kg
£12.99 Incl VAT £10.83 Excl VAT Read more -
Everbuild Exact Gap Foam – 500ml (Box of 12)
£90.00 Incl VAT £75.00 Excl VAT Read more
Roof Felt Adhesives
Browse through our range of roof felt adhesives. At ERoofing, we stock a substantial range of high-quality felt adhesive that come in ranging sizes from 1 litre to 25 litre.
Applying Felt Adhesive
You must apply felt adhesive either using a stiff brush, mop or squeegee. To avoid thickening in cold weather, stock the felt adhesive in a warm room before — for more straightforward application.
Cromar Roofing Felt Adhesive, in particular, should be applied to the surface and left for 15 to 30 minutes (depending upon drying conditions) to develop its full thickness.
The felt should then be placed into the wet adhesive film carefully, rubbing or rolling each section down to ensure highest contact with the adhesive and to expel air trapped between the surface and the felt. Wherever possible, the felt should be unrolled into the roofing felt adhesive and rolled with a light roller (15 to 25kg).
The overlaps should be at least 75mm on the side and 150mm at the ends. To ensure a complete bond at the side and end laps, Cromar Roofing Felt Adhesive can be applied to the underside of the felt and well compacted.
When using with a timber structure, the first layer of felt must be nailed down. Successive layers of felt may then be bonded using Cromar Roofing Felt Adhesive.
When used on concrete surfaces that are porous, it will be necessary to prime the surface first, ensuring that the primer is completely dry before the first layer of felt is applied.
Twenty-four hours after laying felt, check all bondings to ensure that full adhesive has been obtained. Mainly check all laps.
