Everbuild KOS Black Fire Cement - 1kg 
SikaFlex EBT+ Polyurethane Adhesive & Sealant, White - 300ml (Box of 12) 
Everbuild Everflex Fire Mate Intumescent Sealant – 295ml 
Everbuild 501 PVA - 5 Litre 
Soudal Vaseline Lubricating & Protective Spray – 400ml 
ERoofing Lead Hall Clips – Pack of 50 
Bond It B1 Fire Resistant PU Gun Grade Expanding Foam - Pink 750ml 
Cromar Alphachem Liquid Mortar Tone - Black 5L 
Spax Magnetic Bit Holder - 1 Piece 
OX Pro Harling Trowel - 165mm X 165mm 
Freeflow 65mm Square Gutter Drain Pipe 112° Branch - Black 
Everbuild 408 Super Seal - 5 Litre 
Timco Driver and Ground Jobber Bit Set 
Everbuild Forever Clear Silicone Sealant – 295ml 
Code 7 Cast Lead - 390mm x 6m 
Bond It Bitumen Primer - Black 1L 
Hambleside Danelaw TV15/7 Tile Vent - Slate Grey (Box of 5) 
Soudal Brake Cleaner - 400ml 
Cromar All Weather Roof Coat – Black 2.5 Litre 
Bond It Dec-Mate Flexible Filler - Magnolia EU3 
ALM Code 3 Milled Lead - 1200mm x 6m 
TIMCO Precision Screwdriver Bit Set -18 Pieces 
Code 3 Cast Lead - 800mm x 3m 
Sika Patio Seal – 5 Litre 
ALM Code 6 Milled Lead Flashing - 180mm x 3m 
Everbuild Instant Nails – White 290ml 
Bond It Duct Tape - Silver 48mm x 45M 
FloPlast Half Round Internal Stop End, White – 112mm 
Thompson's Emergency Roof Seal - Black 1L 
Chesterfelt Shed Roofing Felt - Green Standard 10m 
Armatool Lead Dresser Set - 5 Piece Set 
FloPlast Square Line Running Outlet White – 114mm x 65mm 
Timloc Telescopic Underfloor Vent 5-7 Courses Roof Felt Adhesives
Best Sellers
-
Code 5 Cast Lead – 510mm x 3m
£111.38 Incl VAT £92.82 Excl VAT Add to basket -
Buckbootz Neoprene Safety Wellington – Blue/Orange
From: £94.99 Incl VAT £94.99 Excl VAT Select options This product has multiple variants. The options may be chosen on the product page -
OX Pro Impact Drill & Drive Accessory Set – 40 Piece
£34.99 Incl VAT £29.16 Excl VAT Add to basket -
ALUKAP-XR Lantern Radius End Cap, White or Brown
From: £105.14 Incl VAT £87.62 Excl VAT Select options This product has multiple variants. The options may be chosen on the product page -
Ronseal Knot Block Primer & Undercoat – White 250ml
£10.99 Incl VAT £9.16 Excl VAT Add to basket -
Corrapol Super Ridge Endcap
From: £53.78 Incl VAT £44.82 Excl VAT Select options This product has multiple variants. The options may be chosen on the product page
Roof Felt Adhesives
Browse through our range of roof felt adhesives. At ERoofing, we stock a substantial range of high-quality felt adhesive that come in ranging sizes from 1 litre to 25 litre.
Applying Felt Adhesive
You must apply felt adhesive either using a stiff brush, mop or squeegee. To avoid thickening in cold weather, stock the felt adhesive in a warm room before — for more straightforward application.
Cromar Roofing Felt Adhesive, in particular, should be applied to the surface and left for 15 to 30 minutes (depending upon drying conditions) to develop its full thickness.
The felt should then be placed into the wet adhesive film carefully, rubbing or rolling each section down to ensure highest contact with the adhesive and to expel air trapped between the surface and the felt. Wherever possible, the felt should be unrolled into the roofing felt adhesive and rolled with a light roller (15 to 25kg).
The overlaps should be at least 75mm on the side and 150mm at the ends. To ensure a complete bond at the side and end laps, Cromar Roofing Felt Adhesive can be applied to the underside of the felt and well compacted.
When using with a timber structure, the first layer of felt must be nailed down. Successive layers of felt may then be bonded using Cromar Roofing Felt Adhesive.
When used on concrete surfaces that are porous, it will be necessary to prime the surface first, ensuring that the primer is completely dry before the first layer of felt is applied.
Twenty-four hours after laying felt, check all bondings to ensure that full adhesive has been obtained. Mainly check all laps.
