Everbuild General Purpose Silicone - Black 290ml (Box of 12) 
ALM Code 3 Milled Lead - 360mm x 6m 
Hambleside Danelaw (HD TVA) Tile Vent Adaptor for TV15 Range 
ALM Code 4 Milled Lead - 800mm x 3m 
FloPlast Round Shoe - White 
Everbuild Exact Gap Foam - 750ml 
Thompson's Patio & Block Paving Anti-Slip Additive - 200g 
Bond It Decking Cleaner - Clear 5L 
Everbuild Caulk Once – White 380ml 
Lead Flexi Slate Pipe Flashing - Pitched 
OX Pro Impact Drill & Drive Accessory Set - 40 Piece 
ALM Code 7 Milled Lead - 450mm x 3m 
Bond It B2 Expanding PU Gun Grade Foam - Beige 750ml 
Bond It Patio Seal Paving & Patio Sealer, Clear - 5L 
Bond It PVA & Adhesive Sealer White 1L - Box of 12 
ALM Code 5 Milled Lead - 150mm x 6m 
Klober 20K Slate Vent KG9795-0429 Slate Grey 
OX Tools Pro Plasterers' Hawk - 330mm x 330mm 
Ronseal Stays White 2in1 Paint & Primer - Matt 750ml 
Code 7 Cast Lead - 450mm x 3m 
Azpects EASYSeal Sandstone Enhancer and Sealer 5L 
Code 6 Cast Lead - 760mm x 6m 
Ulti-Mate Stonewold MkII Roof Tile Vent - Brown 
Soudal Mitre Kit 50g + 200ml - Clear (Box of 12) 
FloPlast Square Line Offset Bend 112.5° Black – 65mm 
Ronseal Diamond Hard Floor Wax - Natural Oak 2.5L 
Soudaseal Mirror Light Grey, 290ml (Box of 12) 
Bond It Silicone Release Spray - 500ml Clear (Mould Releasing Lubricant) 
Soudal Soudafoam Gap Filler Hand Held 750ml 
ALM Code 6 Milled Lead Flashing - 390mm x 6m 
Ulti-Mate Forticrete SL8 Grey Tile Vent 
Chesterfelt Polyester Reinforced Shed Roofing Felt - Green 10m x 1m 
Bond It Bitumen Paint - Black 5L 
OX Polyzip Flex C2 Cutter - 25mm to 55mm 
SikaBond MS Wood Floor Gun Grade - Parquet Brown 600ml Roof Felt Adhesives
Best Sellers
-
OX Tools Pro Spirit Level
From: £46.24 Incl VAT £38.53 Excl VAT Select options This product has multiple variants. The options may be chosen on the product page -
Bond It A43 Threadlock Oil Tolerant Adhesive – 25ml Blue
£4.50 Incl VAT £3.75 Excl VAT Add to basket -
Timco Aluminium Hawk
£13.99 Incl VAT £11.66 Excl VAT Add to basket -
Bond It Organic Cleaner – Clear 2.5L
£7.99 Incl VAT £6.66 Excl VAT Add to basket -
Everbuild Febond PVA – 1L
£9.49 Incl VAT £7.91 Excl VAT Add to basket -
Everbuild Jumbo Sealant Gun – 900ml
£19.99 Incl VAT £16.66 Excl VAT Read more
Roof Felt Adhesives
Browse through our range of roof felt adhesives. At ERoofing, we stock a substantial range of high-quality felt adhesive that come in ranging sizes from 1 litre to 25 litre.
Applying Felt Adhesive
You must apply felt adhesive either using a stiff brush, mop or squeegee. To avoid thickening in cold weather, stock the felt adhesive in a warm room before — for more straightforward application.
Cromar Roofing Felt Adhesive, in particular, should be applied to the surface and left for 15 to 30 minutes (depending upon drying conditions) to develop its full thickness.
The felt should then be placed into the wet adhesive film carefully, rubbing or rolling each section down to ensure highest contact with the adhesive and to expel air trapped between the surface and the felt. Wherever possible, the felt should be unrolled into the roofing felt adhesive and rolled with a light roller (15 to 25kg).
The overlaps should be at least 75mm on the side and 150mm at the ends. To ensure a complete bond at the side and end laps, Cromar Roofing Felt Adhesive can be applied to the underside of the felt and well compacted.
When using with a timber structure, the first layer of felt must be nailed down. Successive layers of felt may then be bonded using Cromar Roofing Felt Adhesive.
When used on concrete surfaces that are porous, it will be necessary to prime the surface first, ensuring that the primer is completely dry before the first layer of felt is applied.
Twenty-four hours after laying felt, check all bondings to ensure that full adhesive has been obtained. Mainly check all laps.
