ALM Code 7 Milled Lead - 300mm x 3m 
Everbuild Black Jack 903 Bitumen Trowel Mastic – 2.5 Litre 
FloPlast Half Round Internal Stop End, White – 112mm 
Soudal Soudafoam Gap Filler Hand Held 750ml (Box of 12) 
Oxyturbo Oxygen Refill 
FrogTape® Delicate Surface Masking Tape - Yellow 24mm x 41.1m 
ALM Code 4 Milled Lead - 1200mm x 6m 
Cromar Black Bitumen Paint – 2.5 Litre 
ALM Code 6 Milled Lead Flashing - 450mm x 3m 
Soudal Repair Express Plaster - White 290ml 
Everbuild 408 Super Seal - 5 Litre 
Timloc Universal Slate Roof Vent Pipe Adaptor Kit 
Easy-Trim Lead R Flashing Textured – 150mm x 5m 
Everbuild Power Pro Sealant Gun - 290 to 380ml (Box of 12) 
Klober Regent Tile Vent KG6084, Grey 
Leadax Lead Free Flashing Alternative 600mm (6M Rolls) 
Timco Pipe Shears 
Isoflex Special Primer - 750ml 
Left Hand Klober Uni-Click Dry Verge Units Terracotta 
Klober Single Pantile Vent - Terracotta KG9860-0152 (Box of 10) 
Code 6 Cast Lead - 850mm x 3m 
Thompson's Emergency Roof Seal - Black 1L 
Everbuild KOS Black Fire Cement - 500g 
Everbuild Black Jack 903 Bitumen Trowel Mastic – 5 Litre 
ALM Code 3 Milled Lead - 150mm x 6m 
Hambleside Danelaw TV15/7 Tile Vent - Terracotta (Box of 5) 
Easy-Trim Universal Dry Verge System - Brown (Box of 50) 
Freeflow Square Gutter System Internal Stopend - White 
Everbuild Pinkgrip Dryfix FR – 750ml 
Soudal Soudatherm Roof 250 - 800ml (Box of 12) Roof Felt Adhesives
Best Sellers
-
Timloc Plain Tile Vent
From: £24.99 Incl VAT £20.83 Excl VAT Select options This product has multiple variants. The options may be chosen on the product page -
Everbuild 501 PVA – 1 Litre
£7.99 Incl VAT £6.66 Excl VAT Add to basket -
Bond It Aluminium Solar Reflective Paint – Silver 2.5L
£18.99 Incl VAT £15.83 Excl VAT Read more -
Stronghold GRP Matting – 16kg
£73.95 Incl VAT £61.63 Excl VAT Read more -
FloPlast Round 92½° Bend – Black
£2.74 Incl VAT £2.28 Excl VAT Add to basket -
OX Tools Trade Tape Measure (Pack of 2)
From: £9.99 Incl VAT £8.33 Excl VAT Select options This product has multiple variants. The options may be chosen on the product page
Roof Felt Adhesives
Browse through our range of roof felt adhesives. At ERoofing, we stock a substantial range of high-quality felt adhesive that come in ranging sizes from 1 litre to 25 litre.
Applying Felt Adhesive
You must apply felt adhesive either using a stiff brush, mop or squeegee. To avoid thickening in cold weather, stock the felt adhesive in a warm room before — for more straightforward application.
Cromar Roofing Felt Adhesive, in particular, should be applied to the surface and left for 15 to 30 minutes (depending upon drying conditions) to develop its full thickness.
The felt should then be placed into the wet adhesive film carefully, rubbing or rolling each section down to ensure highest contact with the adhesive and to expel air trapped between the surface and the felt. Wherever possible, the felt should be unrolled into the roofing felt adhesive and rolled with a light roller (15 to 25kg).
The overlaps should be at least 75mm on the side and 150mm at the ends. To ensure a complete bond at the side and end laps, Cromar Roofing Felt Adhesive can be applied to the underside of the felt and well compacted.
When using with a timber structure, the first layer of felt must be nailed down. Successive layers of felt may then be bonded using Cromar Roofing Felt Adhesive.
When used on concrete surfaces that are porous, it will be necessary to prime the surface first, ensuring that the primer is completely dry before the first layer of felt is applied.
Twenty-four hours after laying felt, check all bondings to ensure that full adhesive has been obtained. Mainly check all laps.
