Everbuild Anchorset Green 150 - Grey 150ml 
Everbuild Anchorset Green 300 - Grey 300ml 
Everbuild General Purpose Silicone - Clear 280ml (Box of 12) 
Everbuild STICK2® All-Purpose Contact Adhesive – 5 Litre 
Klober Boll Roll Tile Vent KG6085, Brown 
Everbuild Lumberjack 550 Floor Adhesive – 600ml 
FloPlast Half Round Downpipe Shoe, Brown – 68mm 
Siroflex SX Contractors LMN Silicone OAK 300ml 
ALM Code 3 Milled Lead - 510mm x 3m 
OX Tools OXIT Sealant & Adhesive - Clear 290ml (Box of 12) 
Hedgehog Gutterbrush Clips (Pack of 20) 
ALM Code 8 Milled Lead - 850mm x 3m 
Ronseal One Coat Water-Based Tile Paint - Magnolia Satin 750ml 
Copper Coil 20m x 50mm 
Everbuild Multi-Use Wonder Wipes Tub (Box of 12) 
Ronseal Kitchen & Bathroom Repair Kit 
FloPlast FloGuard Gutter Guard - 5m (10 x 500mm) 
Bond It Bitumen Primer - Black 25L 
Samac Hall Hooks - (Bags of 10) 
Easy-Trim Lead R Flashing Smooth – 150mm x 5m 
Bond It Rain-Mate All Weather Sealant - White EU3 
Timco Impact Driver Bit Set 
Bond It No Crack Caulk - White 310ml 
Code 8 Cast Lead - 150mm x 3m 
Everbuild EB25 Ultimate Sealant & Adhesive – Anthracite 300ml (Box of 12) 
Everbuild Heavy Duty Multi-Use Wonder Wipes Tub (75 Wipes) 
Ronseal Wet Rot Wood Hardener - 250ml 
Soudal Repair Express Plaster - White 250ml 
Thompson's Water Seal - 5L 
Freeflow 65mm Square Gutter Drain Pipe Shoe - Black 
OB41 Cut Tap Drill Fluid - 400ml 
Everbuild EuroScrim Plasterboard Tape – 100mm x 90m 
Klober Regent Tile Vent KG6084, Dark Brown 
Everbuild Glass Protector - Red (600mm x 25m) 
FloPlast Square Line Internal Stop End White – 114mm 
SikaFlex EBT+ Polyurethane Adhesive & Sealant, Grey - 300ml (Box of 12) 
ALM Code 6 Milled Lead Flashing - 150mm x 3m 
OX TOOLTREK Modular Storage System - 3 Piece 
Soudal Mitre Kit 50g + 200ml - Clear 
Code 6 Cast Lead - 850mm x 6m 
Soudal Soudalead PB Lead Sealant - Grey 300ml (Box of 12) 
Bond It All Weather Roofing Compound - Black 2.5L 
BORA Centipede 4ft x 4ft x 30in Unit - 4 X-Cups + 2 Clamp + C/S Bag 
Everbuild Black Jack 906 Bitumen Roofing Emulsion – 5 Litre 
Ronseal Ultimate Finish Interior Floor Pad Kit 
Everbuild Caulk Once – White 295ml 
Soudal Lead Sheet Sealant 290ml - Grey (Box of 12) 
Pro Magnetic Combination Square - 300mm 
Bond It Dec-Mate Flexible Filler - White EU4 Roof Felt Adhesives
Best Sellers
-
Timco M5 Form A Washer DIN 125 – 50 Pieces
£4.99 Incl VAT £4.16 Excl VAT Add to basket -
Gorilla Super Glue Gel – Clear 15g
£12.99 Incl VAT £10.83 Excl VAT Read more -
Bondit Monster Mesh Pink 50m x 1m – 160g/m2
£36.99 Incl VAT £30.83 Excl VAT Add to basket -
Code 5 Cast Lead – 240mm x 3m
£51.41 Incl VAT £42.84 Excl VAT Add to basket -
ALUKAP-XR Top Wall Flashing, White or Brown
From: £105.88 Incl VAT £88.23 Excl VAT Select options This product has multiple variants. The options may be chosen on the product page -
Klober Profile-Line Twin Plain Tile Vent – Brown KG9861-0247 (Box of 10)
£421.20 Incl VAT £351.00 Excl VAT Add to basket
Roof Felt Adhesives
Browse through our range of roof felt adhesives. At ERoofing, we stock a substantial range of high-quality felt adhesive that come in ranging sizes from 1 litre to 25 litre.
Applying Felt Adhesive
You must apply felt adhesive either using a stiff brush, mop or squeegee. To avoid thickening in cold weather, stock the felt adhesive in a warm room before — for more straightforward application.
Cromar Roofing Felt Adhesive, in particular, should be applied to the surface and left for 15 to 30 minutes (depending upon drying conditions) to develop its full thickness.
The felt should then be placed into the wet adhesive film carefully, rubbing or rolling each section down to ensure highest contact with the adhesive and to expel air trapped between the surface and the felt. Wherever possible, the felt should be unrolled into the roofing felt adhesive and rolled with a light roller (15 to 25kg).
The overlaps should be at least 75mm on the side and 150mm at the ends. To ensure a complete bond at the side and end laps, Cromar Roofing Felt Adhesive can be applied to the underside of the felt and well compacted.
When using with a timber structure, the first layer of felt must be nailed down. Successive layers of felt may then be bonded using Cromar Roofing Felt Adhesive.
When used on concrete surfaces that are porous, it will be necessary to prime the surface first, ensuring that the primer is completely dry before the first layer of felt is applied.
Twenty-four hours after laying felt, check all bondings to ensure that full adhesive has been obtained. Mainly check all laps.
