Everbuild Evercryl One Coat Grey – 20kg 
OX Pro Mini Round Point Shovel 
Code 5 Cast Lead - 180mm x 6m 
Soudafoam Window & Door Xtra Gun Grade, Champagne - 750ml 
Timco Copper Disc Rivets 
Soudal Soudafoam Gap Filler Hand Held 750ml (Box of 12) 
Everbuild Black Jack 901 Black Bitumen Paint – 5 Litre 
Hedgehog Gutter Brush Leaf Guard Black – 4m x 125mm 
Ronseal Diamond Hard Floor Wax - Natural Oak 2.5L 
Soudal PTFE Spray - 400ml 
Everbuild Bath & Kitchen Sealant - 200ml 
FloPlast Round 92½° Bend - White 
IKO Shed Felt - Green 10m Roll 
Bond It Gripbond Pro Max Adhesive - White EU3 
Hedgehog Gutter Brush Leaf Guard Black – 4m x 150mm 
ALM Code 4 Milled Lead - 390mm x 6m 
Siroflex Trade Clearbond Adhesive Internal Use - Clear 290ml 
Freeflow 68mm Round Down Pipe Shoe - Black 
Everbuild Everflex Pyro Mate Fire Rated Silicone – White 295ml 
Soudal B2 Fire Rated Expanding Foam Gun Grade - 750ml 
Pro Magnetic Combination Square - 300mm 
Ronseal One Coat Stays White Radiator Paint - Matt 250ml 
Code 6 Cast Lead - 600mm x 3m 
Code 3 Cast Lead - 360mm x 3m 
Everbuild External Frame Sealant - Stone 290ml (Box of 12) 
Easy-Trim Universal Dry Verge System Black (Pallet of 400) 
Bond It Monster Scrim Drywall Tape - White 100mm x 90m Roof Felt Adhesives
Best Sellers
-
EVO-STIK Sticks Like All Weather Adhesive – Clear 290ml
£7.39 Incl VAT £6.16 Excl VAT Add to basket -
Soudal Degrip All Spray – 300ml
£12.29 Incl VAT £10.24 Excl VAT Add to basket -
Hambleside Danelaw Double Roman Tile Vent TV15/3 – Antique Red (Box of 5)
£114.99 Incl VAT £95.83 Excl VAT Add to basket -
TIMCO Precision Screwdriver Bit Set -18 Pieces
£12.99 Incl VAT £10.83 Excl VAT Add to basket -
Bora Workhorse Single Piece Stand with Folding Legs PM-3350
£46.99 Incl VAT £39.16 Excl VAT Add to basket -
Bond It WP100 Premium Neutral Cure Oxime Silicone Sealant – EU3
From: £7.49 Incl VAT £6.24 Excl VAT Select options This product has multiple variants. The options may be chosen on the product page
Roof Felt Adhesives
Browse through our range of roof felt adhesives. At ERoofing, we stock a substantial range of high-quality felt adhesive that come in ranging sizes from 1 litre to 25 litre.
Applying Felt Adhesive
You must apply felt adhesive either using a stiff brush, mop or squeegee. To avoid thickening in cold weather, stock the felt adhesive in a warm room before — for more straightforward application.
Cromar Roofing Felt Adhesive, in particular, should be applied to the surface and left for 15 to 30 minutes (depending upon drying conditions) to develop its full thickness.
The felt should then be placed into the wet adhesive film carefully, rubbing or rolling each section down to ensure highest contact with the adhesive and to expel air trapped between the surface and the felt. Wherever possible, the felt should be unrolled into the roofing felt adhesive and rolled with a light roller (15 to 25kg).
The overlaps should be at least 75mm on the side and 150mm at the ends. To ensure a complete bond at the side and end laps, Cromar Roofing Felt Adhesive can be applied to the underside of the felt and well compacted.
When using with a timber structure, the first layer of felt must be nailed down. Successive layers of felt may then be bonded using Cromar Roofing Felt Adhesive.
When used on concrete surfaces that are porous, it will be necessary to prime the surface first, ensuring that the primer is completely dry before the first layer of felt is applied.
Twenty-four hours after laying felt, check all bondings to ensure that full adhesive has been obtained. Mainly check all laps.
