ALM Code 7 Milled Lead - 450mm x 3m 
Ronseal One Coat Stain Block - White 2.5L 
Soudal Soudaduct - Grey 300ml 
Ulti-Mate Bold Roll Brown Tile Vent 
Soudal Acetoxy Stay Fresh Sanitary Silicone Sealant – Ice White 290ml (Box of 12) 
FloPlast Square Line Pipe Branch White – 65mm 
Bond It Roof-Mate Roof & Gutter Sealant - Black EU3 
ALM Code 4 Milled Lead - 600mm x 6m 
Bostik Brushable Waterproofer - Black 5L 
Bond It PVA & Adhesive Sealer - White 5L 
ERoofing Lead Hall Clips – Pack of 50 
Everbuild Bath & Kitchen Sealant – White 290ml 
Timloc Double Pantile Tile Vent Brown (Box of 6) 
Hambleside Danelaw Felt Lap Vent 
Everbuild 203 Accelerator & Frostproofer – 5 Litre 
Everbuild Multi-Use Wonder Wipes Spray – 1 Litre 
Soudafoam Gap Filler Genius Gun - 600ml 
Timco Lithium EP2 Grease - 400g 
Freeflow Square Gutter System Running Outlet - Black 
Siroflex Trade Mortar Repair Cement - Grey 300ml 
Timco Cloth Tape White - 50m x 48mm 
Code 7 Cast Lead - 850mm x 3m 
Timloc 1204 Underfloor Vent Vertical Extension + 150mm 
Gorilla Tape - Black (48mm x 32m) 
Timco Collated Drywall Self Drilling Screws 
Freeflow Square Gutter System Internal Stopend - White 
Bond It No Crack Caulk - White 310ml 
Soudal Vaseline Lubricating & Protective Spray – 400ml 
ALM Code 3 Milled Lead - 510mm x 3m 
Bond It Contractors PVA - 2.5L White 
FloPlast Half Round Gutter 90° Bend, Brown – 112mm 
OX Pro Wide Head End Cutting Nippers - 200mm 
Everbuild Everflex Contract 700T LMN Silicone - Translucent (Box of 25) 
Everbuild Caulk Once – White 295ml 
OX Pro Chalk Refill, Red - 226g 
Soudal Gun & Foam Cleaner Gun Grade - 500ml 
OX Pro Grout Remover 
Cromar Vent 3 Classic Breathable Membrane - 1m x 50m 
Spax Pozi Pz1 Drill Bits - 25mm (Pack of 5) 
Bond It Patio Blaster - Clear 2.5L Roof Felt Adhesives
Best Sellers
-
Axgard 6mm Solid Polycarbonate Sheet, Patterned
From: £30.50 Incl VAT £25.42 Excl VAT Select options This product has multiple variants. The options may be chosen on the product page -
Bond It Cyanoacrylate Superglue Hi Viscosity – Clear 20g
£3.99 Incl VAT £3.33 Excl VAT Add to basket -
10 x Timloc 3014C Over Fascia Ventilation System 1M – Black
£38.99 Incl VAT £32.49 Excl VAT Add to basket -
Everflex Premium+ 450 Builders Silicone – Oak 300ml (Box of 25)
£132.75 Incl VAT £110.63 Excl VAT Add to basket -
Everbuild Flexible Decorators Filler – White 290ml
£4.99 Incl VAT £4.16 Excl VAT Add to basket -
Ulti-Mate Redland Regent Tile Vent
From: £59.99 Incl VAT £49.99 Excl VAT Select options This product has multiple variants. The options may be chosen on the product page
Roof Felt Adhesives
Browse through our range of roof felt adhesives. At ERoofing, we stock a substantial range of high-quality felt adhesive that come in ranging sizes from 1 litre to 25 litre.
Applying Felt Adhesive
You must apply felt adhesive either using a stiff brush, mop or squeegee. To avoid thickening in cold weather, stock the felt adhesive in a warm room before — for more straightforward application.
Cromar Roofing Felt Adhesive, in particular, should be applied to the surface and left for 15 to 30 minutes (depending upon drying conditions) to develop its full thickness.
The felt should then be placed into the wet adhesive film carefully, rubbing or rolling each section down to ensure highest contact with the adhesive and to expel air trapped between the surface and the felt. Wherever possible, the felt should be unrolled into the roofing felt adhesive and rolled with a light roller (15 to 25kg).
The overlaps should be at least 75mm on the side and 150mm at the ends. To ensure a complete bond at the side and end laps, Cromar Roofing Felt Adhesive can be applied to the underside of the felt and well compacted.
When using with a timber structure, the first layer of felt must be nailed down. Successive layers of felt may then be bonded using Cromar Roofing Felt Adhesive.
When used on concrete surfaces that are porous, it will be necessary to prime the surface first, ensuring that the primer is completely dry before the first layer of felt is applied.
Twenty-four hours after laying felt, check all bondings to ensure that full adhesive has been obtained. Mainly check all laps.
