FloPlast Square External Stopend - White 
Code 3 Cast Lead - 1000mm x 3m 
Everbuild Coving Adhesive & Joint Filler - 290ml 
Right Hand Klober Contract Dry Verge Unit Grey 
OX Tools Pro Chalk Line Reel 30m / 100ft 
Bond It Multi-Wipes Spray - Clear 1L 
Pro Magnetic Combination Square - 300mm 
ALM Code 4 Milled Lead - 850mm x 3m 
Everbuild P18 Gas Leak Detector - 400ml (Box of 12) 
Everbuild P18 Gas Leak Detector - 400ml 
Klober Permo Ultra 120 - 1m x 50m 
Cromar Acrypol+ Plus Roof Coating Waterproof System - Grey 2.5kg 
ALM Code 3 Milled Lead - 510mm x 6m 
Klober Flexipipe 75/100mm - (KG972400) 
Everbuild General Purpose Silicone - Clear 280ml (Box of 12) 
Code 7 Cast Lead - 210mm x 3m 
Bond It B2 Expanding PU Gun Grade Foam - Beige 750ml 
Code 8 Cast Lead - 850mm x 3m 
Bond It Drive Alive Tarmac Restorer - 4 Litres 
OX Trade 4 Piece Spirit Level Set - 230, 600, 1200 & 1800mm 
FloPlast Half Round Downpipe 112° Bend, Black 
Ronseal Knot Block Primer & Undercoat - White 250ml 
Everbuild Bath & Kitchen Sealant - 200ml 
10 x Timloc 3014C Over Fascia Ventilation System 1M - Black 
Bond It SBR Admixture - White 5L 
Bond It Duct Tape - Silver 48mm x 45M 
Ronseal One Coat Wood Primer & Undercoat - White 750ml 
Everbuild General Purpose Silicone - Black 290ml (Box of 12) 
Soudal Gap Filler Expanding Foam Genius Gun 300ml - Champagne 
Sikabond PVA - White 5 Litre 
Soudal Cleaner & Degreaser - 400ml 
Sika Damp-Proof Slurry Grey - 25kg Roof Felt Adhesives
Best Sellers
-
Soudal Trade Gun Grade Expanding Foam – 750ml (Box of 12)
£49.99 Incl VAT £41.66 Excl VAT Add to basket -
Timloc Interlocking Plain Tile Vent Brown (Box of 12)
£239.80 Incl VAT £199.83 Excl VAT Add to basket -
FirmaHold Collated Clipped Head Nails & Fuel Cells – 2.8 x 63/3CFC – Ring Shank – FirmaGalv + (CLASS 2)
£3,200.00 Incl VAT £2,666.67 Excl VAT Add to basket -
Code 4 Cast Lead – 914mm x 6m
£319.87 Incl VAT £266.56 Excl VAT Add to basket -
Timco Firmahold Hammer Tacker
£34.99 Incl VAT £29.16 Excl VAT Add to basket -
Freeflow 112mm Round Gutter System Running Outlet – Black
£3.32 Incl VAT £2.77 Excl VAT Read more
Roof Felt Adhesives
Browse through our range of roof felt adhesives. At ERoofing, we stock a substantial range of high-quality felt adhesive that come in ranging sizes from 1 litre to 25 litre.
Applying Felt Adhesive
You must apply felt adhesive either using a stiff brush, mop or squeegee. To avoid thickening in cold weather, stock the felt adhesive in a warm room before — for more straightforward application.
Cromar Roofing Felt Adhesive, in particular, should be applied to the surface and left for 15 to 30 minutes (depending upon drying conditions) to develop its full thickness.
The felt should then be placed into the wet adhesive film carefully, rubbing or rolling each section down to ensure highest contact with the adhesive and to expel air trapped between the surface and the felt. Wherever possible, the felt should be unrolled into the roofing felt adhesive and rolled with a light roller (15 to 25kg).
The overlaps should be at least 75mm on the side and 150mm at the ends. To ensure a complete bond at the side and end laps, Cromar Roofing Felt Adhesive can be applied to the underside of the felt and well compacted.
When using with a timber structure, the first layer of felt must be nailed down. Successive layers of felt may then be bonded using Cromar Roofing Felt Adhesive.
When used on concrete surfaces that are porous, it will be necessary to prime the surface first, ensuring that the primer is completely dry before the first layer of felt is applied.
Twenty-four hours after laying felt, check all bondings to ensure that full adhesive has been obtained. Mainly check all laps.
